Manual hydraulic pipe buckling machine_Pipe crimping machine pipe buckling machine

电机功率：

2.2KW

最高油压：

31.5Mpa

整机重量：

200KG

.inch reinforced specifications:
, pressure pipe diameter: ~ (maximum inches, minimum minutes)
. Motor power: (three-phase 3) or 3 (single-phase)
3. Rated voltage: three-phase 3 or single-phase
． Maximum oil pressure:
． Oil pump flow:
． Maximum buckling pressure:
. Random matching mold: (/ )(/ )( / ) (3/ )(,/) ( ,/ )
. Overall dimensions: **(**)< br/> . Complete machine weight (excluding oil):
. Can hold 1 liter of hydraulic oil.
Instructions for use:
Add hydraulic oil, use 3 kg of anti-wear hydraulic oil.
, Connect the power supply.
Install the molds you need.
, Motor switch controls the motor.
After starting the machine, check whether the motor runs clockwise.
. Fine adjustment should be used in conjunction with the forward and backward switch. Turn clockwise to make it larger, and vice versa to make it smaller. Then press the forward and backward button again to stop working.
. The mold closing of the forward and backward switch is to shrink, and the mold is to open to retreat
. If the customer wants to disassemble and assemble the magnetic switch for cleaning, it must be installed according to our company's circuit diagram.