Changsha plastic thermoforming machine

Small hot press molding machine, pneumatic hot press molding machine, hot press molding machine, cold and hot press molding machine, plastic hot press molding machine, manual hot press molding machine, fully automatic hot press molding machine, hot press hydraulic molding machine four-column hot press The press is a machine used to produce multi-layer boards such as plywood. It has a platform that can move up and down. The area is equivalent to the product. The lower platform is driven by a hydraulic cylinder and can be moved. The upper platform serves as a fixed installation that creates pressure with the lower platform. There is a steam or electric heating device inside the platform. That’s why it’s called a hot press. The four-column hot press is a machine that processes materials through heating and pressure. It has an upper and lower heating device and a pressurizing mechanism. The distance between the upper and lower heating devices is determined according to the workpiece processing requirements during remanufacturing. Pressurization is usually a four-column hydraulic device.
On the basis of negative pressure, positive pressure is added, coupled with special glue. For series processing, its linear shape and adhesion force are incomparable to negative pressure equipment. Due to its high pressure, low temperature, and membrane The short pressing time solves the problem of deformation when processing workpieces with negative pressure equipment (especially large-area workpieces), greatly reducing the degree of deformation of the workpiece. Using advanced electronic new product control, the processing procedures of table entry, table lifting, heating, vacuum, film pressing, stripping, and table lowering can be automatically completed through adjustment. It is mainly powered by oil pressure and compressed air, so it must have sufficient air pressure and air volume. The frame is made of steel plates and has a reasonable overall structure. The two worktables can be used repeatedly or separately. The vacuum can be adjusted to low pressure first, then high pressure suction, and the film pressure can reach up to . Through adjustment, the product can achieve the desired effect.
The four-column hot press machine is applicable to punching and cutting various mobile phones or silicone and plastic buttons, and cutting and slitting of plastic products.
, cutting of various mobile phones, digital cameras, laptop LCD screen protective films, precision cutting of various stickers, trademarks, etc.
Membrane switches and membrane panels of various types, , , etc. are bulged and molded.
, Laptop keyboard soft circuit circuit pressing molding, etc.,