Liuzhou Huayang Solar 24H after-sales maintenance service | Water leakage - no water storage |

Liuzhou Huayang Solar After-sales Maintenance Service | Water leakage - no water storage | Liuzhou Huayang Solar Water Heater After-sales Telephone: -
Liuzhou Huayang Service Hotline: -
Fault 11. There is no heat preservation function, and it keeps heating. Until the temperature trips
Cause: The operating temperature of the thermostat is too high or it has been melted and short-circuited. Solution: Replace the thermostat.
Fault 12. It is always in the heat preservation state and cannot be reheated
Cause: The thermostat cannot be reset and remains open circuit. Solution: Replace the thermostat.
Fault 13. Heating time is too long
Cause: The time required for the water heater to heat to the highest water temperature when used for the first time (or stopped for a period of time) is about an hour. (Treatment method: It is a normal phenomenon) The water heater does not use the highest power level for heating (for electric water heaters with power conversion function) (Treatment method: Turn the power conversion switch to the maximum power level.). The electric heating tube is broken (treatment method: replace the electric heating tube)