Weifang epoxy electrostatic conductive anti-corrosion topcoat primer, free shipping from the manufacturer, large quantities in stock

Epoxy electrostatically conductive anti-corrosion topcoat
Features:
It is a two-component room temperature curing coating that integrates water resistance, oil resistance and electrostatic conductivity. The coating has low curing temperature, strong adhesion, excellent water resistance, acid resistance, alkali resistance, and oil resistance, and good electrostatic conductive properties. There is no leakage of static conductive additives after long-term use, the coating performance is stable, and there is no de-blistering and other phenomena. No pollution to oil products.
It can be used on the inner walls of finished oil storage tanks (especially aviation kerosene) in refineries and oil product stations, and can also be used on crude oil, sewage and other media.
The coating is divided into primer and curing agent. The primer is divided into component B and the curing agent is B component.
Construction instructions:
Surface treatment: The conductive anti-corrosion coating requires surface sandblasting, and the rust removal level should reach the level specified by B/3. Treated surfaces should be primed within hours.
. Construction environment During construction, it is strictly forbidden to mix water, sand, cotton yarn and other foreign matter into the coating. If it encounters windy sand, rain, snow and heavy fog, construction must be stopped to ensure the quality of the coating.
Before preparing and using the paint, the two components /B should be fully stirred evenly, and then stirred evenly before construction. When conditions permit, it is recommended to make a small sample first for proportioning testing.
, Construction method of electrostatic corrosion-conducting coating can use ordinary spraying, high-pressure airless spraying, brushing and other processes. The trial period of coating construction is generally no longer than four hours. When the temperature is high, the trial period of construction will be shortened accordingly, and the paint should be used as it is. The next coat can be applied when the previous coat of paint reaches surface dryness. After construction is completed, the spray gun, feeding pipe, paint brush, etc. should be cleaned in time with solvent to prevent residual paint from solidifying and affecting next use.
When the viscosity of the thinner paint is too high, it can be diluted with the special thinner produced by our company. The dosage should not exceed the amount of paint.
. Coating structure: It is recommended to use one base and three-sided coating structure for electrostatically conductive and anti-corrosion coatings. The coating dosage is ./square meter and the total dry film thickness of the coating is -. A topcoat can be added to specially weighted areas.
Curing time:
Curing for -days below ℃, -days for curing at ℃, and 3-days for curing above 3℃.
Construction protection:
Workers should wear work clothes during construction to avoid skin contact with paint. Once the skin is stained with paint, it can be washed with soapy water. In severe cases, cotton gauze dipped in alcohol or gasoline can be used to wipe the skin. Do not wash your hands with thinner.
Packaging: Component/barrel Component B/barrel
Storage: The storage temperature should not be higher than ℃. It should be stored away from fire sources and avoid rain and long-term exposure to strong sunlight. During the storage period, if there is sediment in the barrel, it will not affect the use after stirring evenly.
Jining Huichuang Technology Development Co., Ltd. specializes in the production of various types of heavy-duty coatings such as anti-corrosion coatings, high-temperature resistant coatings, fire-retardant coatings, industrial floor coatings, oil tank electrostatic conductive coatings, cool glue insulation paint and special oil-resistant coatings. Anticorrosive paint, anticorrosive coating! The company is an economic entity integrating scientific research, production and marketing, with an annual production capacity of more than tons.
Our main products are: epoxy paint, epoxy floor paint, high temperature resistant paint, fluorocarbon paint, glass flake paint, electrostatic conductive paint, acrylic paint, polyurethane paint, coal pitch anti-corrosion paint, road marking Paint, road marking paint, special resistant paint and other heavy-duty anti-corrosion paint, anti-corrosion coatings.
The company is located in Jining High-tech Zone, the hometown of Confucius and Mencius and the capital of canals, adjacent to the Beijing-Hangzhou Grand Canal and the Yanzhou Railway Junction. It has convenient transportation and developed logistics, which can ensure the normal receipt and delivery of various goods.
The company has a scientific research center and has long-term cooperation with higher scientific research institutions such as the School of Chemical Engineering of Shandong University, the Coatings Research Institute of Shandong University of Science and Technology, and the Shandong Architectural Research Institute. After years of development and accumulation, it has rich experience in the production of special coatings and techinque level.
The company has always been based on the philosophy of honesty, quality service, and being a good person before doing things. It pursues the entrepreneurial spirit of pioneering innovation and excellence, constantly improves product quality and service levels, and pursues first-class products and first-class services. Serve the majority of users!
Our company sincerely welcomes users and colleagues from all walks of life to visit our factory for inspection, negotiation and consultation!
Thickener: Paint that has not been thickened is in a dilute solution state. Water separation and pigment sedimentation are prone to occur during storage. Moreover, sagging occurs during the construction process and a coating film with uniform thickness cannot be formed. , therefore a certain amount of thickener must be added to increase the viscosity of the paint to facilitate storage and construction. The viscosity of the paint has no direct relationship with the concentration. The viscosity is adjusted by adding a thickener. The concentration is the active ingredient in the paint and is constant.