Epoxy ester anticorrosive paint

桶：

1元

Epoxy ester anticorrosive paint
- Composition: The paint is prepared from epoxy resin, vegetable oil, anti-rust pigments, extender pigments, driers, etc.
- Product features:
3. b., '
- Safety and environmental protection
3. b., '
- Strong paint film
3. b. '
- Strong adhesion
3. b., '
- Fast drying and easy construction.
- Performance: The paint film is hard and durable, with good adhesion. If used in conjunction with phosphating primer, the moisture resistance, salt spray resistance and rust resistance of the paint film can be improved.
- Applicable: Iron red and iron black epoxy primers are suitable for coating black metal surfaces, and zinc yellow epoxy ester primers are suitable for coating light metal surfaces. They are also suitable for coastal areas and humid tropical climates. Surface priming of metal materials.
- Technical indicators: no blistering, no expansion, no bleeding
- Surface treatment: The steel surface is sandblasted to meet the requirements
-,
- level or use power tools and manual rust removal to achieve
- level. Pickling can also be used to remove rust.
- Mixing ratio: single-component paint, stir thoroughly after opening the package and then use.
- Restrictions: The substrate temperature must be higher than the dew point
- ℃
- The relative humidity should not be greater than
-.
- Notes:
3. b., '
- Before painting, the rust and oil on the metal surface need to be removed, and then a layer of phosphating primer should be applied. The paint must be stirred evenly before construction, diluted with thinner, sprayed or brushed. After the coating is dry, sand it with water sandpaper, and then apply putty or topcoat after drying.
3. b., '
- The thinner used in this paint is a special thinner for epoxy ester paint.
- Packaging specification:
- Barrel
- Storage period: one year