Epoxy zinc-rich primer

桶：

1元

Epoxy zinc-rich primer
- Composition features:
- The paint is composed of zinc powder and epoxy resin as the base material, and is added with ultra-fine zinc powder and epoxy resin as one component (
-) It is a two-component heavy-duty anti-corrosion primer formulated with curing agent as component B and polyamide resin as curing agent. It has the characteristics of drying at room temperature and preventing zinc powder from precipitating.
- Performance and use:
.- The paint film has a high content of zinc powder, has cathodic protection, good adhesion and excellent water resistance and anti-rust properties. It also has the characteristics of quick drying and oil resistance, and can be matched with most anti-rust paints and topcoats. The paint film thickness is controlled at about
- microns without affecting the welding performance. This paint can be used as a maintenance primer for steel plates in various parts of shipbuilding and bridges after polishing and sandblasting, and as an anti-corrosion coating on the surface of steel structures.
- Color: zinc gray
- Flash point: about
- ℃
- Basic parameters: drying time (
- ℃ relative humidity
-) table Dry
- Hours, hard drying
- Hours, fully cured
- Days
- Coating matching and construction
. ., '
- Before painting First, mix the two components of the paint
- and B according to the specified proportion, stir evenly, and mature for half an hour before the coating construction can be carried out.
.- The ratio of paint components: component B is
-:
-, and the service life after preparation is (
- ℃)
- hours.
. ., '
- The paint can be applied by brushing, roller coating and high-pressure airless spraying.
. As an anti-rust paint, it is about
- grams
-m2 and the dry film thickness is
- micron.
. ., '
-Thinner: Epoxy thinner.
. ., '
- Metal surface treatment: In order to protect metal objects, the steel surface needs to be polished or sandblasted to remove oxide scale, rust, oil stains, etc., and meet Swedish rust removal standards< br/>- Painting can only be done after level 1.
. ., '
- Back-end supporting coatings: epoxy mica iron intermediate paint, epoxy asphalt series coatings, chlorinated rubber coatings.
. ., '
- The curing reaction is slow when the construction environment is lower than
-℃.
- Packing specifications: Epoxy zinc-rich primer slurry (component)
- barrel, cured for six days (component B)
- barrel.
- Storage period: one year