Year1
- 固含量：
- 30%
- 保质期：
- 6个月
- 颜色：
- 淡绿
) The intermediate coating resin should match the base coating resin. The viscosity of glass flake coating is generally
to
, the thixotropic index is
to
, and the thickness of each layer It varies with different construction methods. The construction can be done by roller coating, brush coating or spraying. High-pressure airless spraying should be used for spraying.
) When preparing glass flake paint, a stirrer with a higher rotation speed should be used. Add an appropriate proportion of matching curing agent and stir for more than
minutes. The amount of flake adhesive paint stirred at one time should be controlled within
Use it within 1 hour, and the initial setting time should be controlled at about
.
) After the previous one is dry, carry out the next construction. The dosage is about
about 1 square meter. The painting direction of the paint should be consistent, and the painting direction between the two layers should be vertical. The coating should be even, no missed coating is allowed, and there should be no sags, bubbles, pinholes, debris (bristle, sand, etc.), and no other defects are allowed. .
) Apply a layer of chopped strand felt to the uneven surface and structural corners for local reinforcement. Use a roller to apply a layer of paint and then add a layer of glass felt. After soaking, use a paint-impregnated roller to remove the bubble. Then carry out construction according to the above construction requirements.
Top coating of resin glass flake coating
Since the corrosive medium directly contacts the outer surface of the coating, the top coating resin must have excellent corrosion resistance and minimize the amount of filler. At the same time, the topcoat also plays a role in beautifying the appearance of the coating and increasing its impermeability. When preparing the coating, add an appropriate proportion of matching curing agent and stir for more than
minutes before proceeding with construction. Generally, the dosage is about
dao square meters, and the last coat is The topcoat should contain styrene paraffin liquid.
WhatsApp
