Dongying high chlorinated polyethylene anticorrosive paint

Dongying high chlorinated polyethylene anticorrosive paint product performance
It is composed of high chlorinated polyethylene, modified resin, plasticizer, pigments and fillers, solvents and additives.
The paint film has excellent resistance to seawater, chemical atmosphere, acid, alkali and salt medium corrosion.
The paint film is tough, has strong adhesion, fast drying time, is easy to construct, and can be constructed at low temperatures.
The paint film has light, color and aging resistance.
Scope of application
Suitable for surface corrosion protection of various steel structures or concrete facilities in chemical atmosphere, industrial atmosphere, marine environment and acid, alkali and salt corrosion.
Physical Parameters
Color: Iron red primer or light-colored topcoat in various colors.
Glossy semi-gloss
Theoretical coating rate primer/㎡topcoat/㎡ (based on dry film, excluding loss)
Specific gravity primer.topcoat
Flash point ℃
Drying time ℃ table dry and solid dry
Construction instructions
Mixing ratio single component (aluminum powder paint component A and component B)
Curing time is turned on and ready for use
Unlimited construction life
Special diluent for thinner
Dilution amount~%
Construction method: brushing, roller coating or airless spraying. It is recommended to use brushing for the first primer.
Spray hole
Spray pressure/
Special thinner for tool cleaning
Overcoating time
Substrate temperature
℃
℃
℃
Shortest


Longest
No restrictions on primer and topcoat
Surface treatment Steel surface treatment is performed as per. Shot blasting or sandblasting up to grade . or hand and power tool removal. The surface after rust removal should be free of oil and dust before painting. And paint it immediately to avoid secondary rust. The concrete surface treatment is carried out according to the requirements, and the concrete surface moisture content is %.
Construction conditions
The coating must be thoroughly stirred evenly before construction.
The surface temperature of the substrate is higher than the dew point and above ℃, generally between ℃ and ℃, and the relative humidity is below %. It is not suitable for construction in bad weather such as rain, snow, fog, and heavy sandstorms. In hot summer, construction under strong sunlight should be avoided.
Front-end supporting coatings include epoxy zinc-rich primer, high-performance water-based inorganic zinc silicate coating, and anti-corrosion coating primer.
The following supporting coatings are high chlorinated polyethylene anticorrosive coating topcoat and chlorinated rubber topcoat
It is recommended to apply two coats of primer and two coats of topcoat, with a dry film thickness of about
Packaging Specifications. Kilogram in liter container.
This product should be stored in a cool, dry and ventilated indoor warehouse. The storage period at room temperature is one year.
Pay attention to ventilation at the construction site, strictly prohibit fireworks, and keep away from open flames, heat sources, and oxidants. Paint construction workers should wear protective equipment during construction to avoid long-term inhalation of solvent vapor or paint mist to prevent damage to the skin and eyes. Wash skin with soapy water immediately, and rinse eyes thoroughly with water immediately. If you swallow it by mistake, induce vomiting with warm water and then seek medical examination.
The service life and anti-corrosion effect of the knee membrane depend on factors such as surface treatment during painting construction and paint film thickness. Users should meet the requirements of surface treatment and construction conditions when using it.
The number of coats of this coating should be determined according to the use environment and design requirements, and the final thickness of the coating film should be determined by the design specifications.
Qingdao Baiwei Paint Co., Ltd.
Qingdao Runmeijia Anticorrosive Coating Co., Ltd.
Sales Manager Liu Changjiang
Mobile phone
Landline
Email@
Address: Ankang Road, Huangshan Economic Zone, Wangtai, Huangdao District, Qingdao