Dongying chlorinated rubber topcoat, Dongying chlorinated rubber paint

Product performance of Dongying chlorinated rubber topcoat and Dongying chlorinated rubber paint
Composed of chlorinated rubber, modified resin, pigments and fillers, plasticizers, solvents, additives, etc.
The paint film has excellent seawater resistance, wear resistance and moisture resistance.
The paint film is resistant to alkali, salt spray and alternating dry and wet properties.
The paint film is tough, has good sealing properties and has excellent adhesion.
The paint film dries quickly, is easy to apply, and can be applied at low temperatures.
Scope of application
Used as anti-corrosion coating for ships, port machinery, offshore platform concrete and other steel structures.
Physical Parameters
Color: Iron red primer or dark brown topcoat in various colors.
Glossy semi-gloss
Theoretical coating rate primer/㎡topcoat/㎡ (based on dry film, excluding loss)
Specific gravity is about primer.topcoat
Flash point ℃
Drying time ℃ Surface dry and solid dry
Construction instructions
Mixing ratio single component
Open the curing time and mix well before use
No limit on construction life
Thinner Special Thinner
Construction Method
Construction Method
Nozzle Hole
Spray Pressure
Maximum Dilution Amount
High Pressure Airless Spraying
.～.
～
%
Air spray
.～.
.～.
%
Brush, roller


%
Overcoating time
Substrate temperature
℃
℃
℃
Shortest
< br/>
Longest
Unlimited primer and topcoat
Special thinner for tool cleaning
Surface treatment Steel surface treatment is performed as per. Shot blasting or sandblasting up to grade 1 or manual and power tool rust removal up to grade 1. The surface after rust removal should be free of oil and dust before painting, and paint immediately to avoid secondary rust.
For surface maintenance with old paint film remaining, the loose old paint film should be removed, cleaned, and dried before painting.
Construction conditions The coating must be thoroughly stirred evenly before construction.
The surface temperature of the substrate is higher than the dew point and below ℃, and the relative humidity is below %. It is not suitable for construction in bad weather such as rain, snow, fog, and heavy sandstorms. In hot summer, construction under strong sunlight should be avoided.
The front-end supporting coatings include epoxy zinc-rich primer, inorganic zinc silicate primer, and epoxy iron red primer.
The supporting coatings include chlorinated rubber topcoat and one-component acrylic topcoat.
It is recommended that the number of coats is two coats of primer and two coats of topcoat, dry film thickness.
Packaging specification. Kilogram in liter container.
This product should be stored in a cool, dry and ventilated indoor warehouse. The storage period at room temperature is one year.
Pay attention to ventilation at the construction site, strictly prohibit fireworks, and keep away from open flames, heat sources, and oxidants. Paint construction workers should wear protective equipment during construction to avoid long-term inhalation of solvent vapor or paint mist to prevent damage to the skin and eyes. Wash skin with soapy water immediately, and rinse eyes thoroughly with clean water immediately. If you swallow it by mistake, induce vomiting with warm water and then seek medical examination.
The service life and anti-corrosion effect of the knee membrane depend on factors such as surface treatment during painting construction and paint film thickness. Users should meet the requirements of surface treatment and construction conditions when using it.
The number of coats of this coating should be determined according to the use environment and design requirements, and the final thickness of the coating film should be determined by the design specifications.
Qingdao Baiwei Paint Co., Ltd.
Qingdao Runmeijia Anticorrosive Coating Co., Ltd.
Sales Manager Liu Changjiang
Mobile phone
Landline
Email@
Address: Ankang Road, Huangshan Economic Zone, Wangtai, Huangdao District, Qingdao