How much does Dongying epoxy self-leveling floor paint cost per square meter?

How much does Dongying epoxy self-leveling floor paint cost per square meter? Product performance
Component A is prepared by grinding special epoxy resin, toughening agent, modified resin, pigments and fillers. Component B is modified polyamide curing agent.
It has good substrate adhesion and construction performance. It can be partially repaired after the coating is damaged. It is a good protective coating for metal and concrete. Outstanding corrosion resistance, resistant to corrosion by most acids, alkalis, and salts. High hardness and wear resistance, excellent resistance to water penetration and solvent resistance.
It is a cross-linked normal temperature cross-linked curing coating and is easy to construct.
Scope of application
It is suitable for the floors of buildings that need to be clean and easy to clean, such as the pharmaceutical industry, food industry, and hospitals, and can meet domestic and international requirements for the construction and use of clean workshops in the pharmaceutical and food industries.
It is suitable for the aerospace industry, automobile industry, electronic instrument industry, etc. that require clean, wear-resistant and impact-resistant building floors.
Physical parameters
Various colors
Glossy matte to bright rough to smooth
Drying time bottom, medium and surface dry surface dry
Curing time days
Specific gravity is about.~
Construction instructions
Curing minutes
Mixing ratio group B material
Bottombr/> Middle layer~
Surface~
Construction life
br/> Construction method: roller coating, blade coating
Thinner: Epoxy special thinner
Usage amount: Theoretical coating rate of brush path
Bottom.㎏/㎡
Middle.㎏/ ㎡
Noodles.㎏/㎡
The above dosage does not include the dosage of aggregate. The use of intermediate paint and topcoat should be adjusted as needed. The specific dosage is subject to the actual situation. The next process can only be carried out after the primer, midcoat and topcoat have been applied for several hours.
Surface treatment The newly completed industrial floor must go through a certain drying and curing period before construction. It takes about days in summer and about days in winter. Before construction, it should be measured with a moisture meter. The dryness should be below %. construction.
Construction conditions Good sealing conditions must be ensured during construction to prevent dust from entering. The coating surface must be dry, dust-free and oil-free, and must be clean. Construction is strictly prohibited in foggy, rainy days and when the ambient humidity exceeds %. The optimal construction temperature is ~℃.
Supported within the system.
Packaging specifications: 1 liter drum, 1 liter package
Storage This product should be stored in a cool, dry and ventilated indoor warehouse, and the storage period is one year at room temperature.
Safety: All fire sources are strictly prohibited at the construction site and good ventilation must be maintained. Paint construction workers must wear protective equipment to prevent inhalation of paint mist from damaging their eyes and skin. If paint splashes on your skin, wash it immediately with soapy water. If paint splashes on your eyes, rinse immediately with plenty of water and seek medical attention.
Qingdao Baiwei Paint Co., Ltd.
Qingdao Runmeijia Anticorrosive Coating Co., Ltd.
Sales Manager Liu Changjiang
Mobile phone
Landline
Email@
Address: Ankang Road, Huangshan Economic Zone, Wangtai, Huangdao District, Qingdao