Dongying acrylic topcoat

Product performance of Dongying acrylic topcoat
Component A consists of special modified resin, hydroxy acrylic resin, high-quality weather-resistant pigments, fillers, solvents, additives, etc. Component B is curing agent (outdoor) and curing agent (indoor).
The paint film has excellent weather resistance and aging resistance.
The paint film has good wear resistance, is tough and plump, has bright color and good color retention.
The coating is resistant to oil, benzene solvents, water, sea water, boiling water, acids, alkalis, salts and chemical atmospheric corrosion.
The coating has good penetration into the substrate and excellent adhesion.
Scope of application
It can be used as anti-corrosion topcoat on the surface of steel structures, and can also be used as anti-corrosion decorative topcoat on the surface of wood and cement products.
Physical parameters
Various colors
Glossy semi-gloss
Theoretical coating rate/㎡ (based on dry film, excluding loss)
Specific gravity is about
Flash Point A component ℃ Component B ℃
Drying time ℃ Surface dry and solid dry
Construction instructions
Mixing ratio two components, semi-glossy component A (paint) component B (curing agent) (weight ratio)
Glossy component A (paint) component B (curing agent) (weight ratio)
Aluminum powder paint component A (paint) component B (curing agent) (weight ratio)
Aging time minutes
Construction life (℃) hours
Thinner Polyurethane coating thinner
Dilution amount ~ %
Construction method brushing, roller coating or airless spraying .
Nozzle hole discharge pressure/
Overcoating time
Substrate temperature
℃
℃
℃






Tool cleaning polyurethane paint thinner
Surface treatment to remove dust and stains on the surface of the primer.
Construction conditions
The coating must be thoroughly stirred evenly before construction.
The ambient temperature is ℃ ~ ℃ and the relative humidity is below %, and the surface temperature of the substrate is higher than the dew point and above ℃.
It is not suitable for construction in bad weather such as rain, snow, fog, heavy sandstorms, etc. During the hot season, construction under strong sunlight should be avoided.
The front road is equipped with anti-corrosion paint primer and polyurethane anti-rust primer
It is recommended that the number of coats is two and the dry film thickness is about
Qingdao Baiwei Paint Co., Ltd.
Qingdao Run Meijia Anticorrosive Coating Co., Ltd.
Sales Manager Liu Changjiang
Mobile phone
Landline
Email@
Address Ankang Road, Huangshan Economic Zone, Wangtai, Huangdao District, Qingdao