Dongying epoxy zinc-rich primer manufacturer

Dongying Epoxy Zinc-rich Primer
Product Performance
Component A is an interpenetrating network resin formed by the polymerization of glyceryl ether, epoxy, hydroxy acrylic monomers, etc., with light-fast pigments, fillers, and auxiliary materials. agents, etc. Component B is an adduct curing agent.
The paint film is thick and can be formed at least once, and has good shielding and anti-penetration properties.
The coating has excellent acid and salt medium corrosion resistance, but weak alkali resistance.
The paint film has good weather resistance, gloss retention and color retention.
The paint film is tough, has good adhesion, flexibility and wear resistance.
Scope of application: Anti-corrosion coatings on steel structures, gas cabinets, pipelines, oil storage tanks, oil pipelines, oil drilling platforms, factory steel platforms, etc. in the chemical industry atmosphere.
Physical parameters
Various colors
Glossy semi-gloss
Theoretical coating rate/㎡ (based on dry film, excluding loss)
Specific gravity is about
Flash Point ℃
Drying time ℃ Surface dry and solid dry
Fully cured ℃
Construction instructions
Mixing ratio of two components, component A (primer) and component B (curing agent) ( Weight ratio)
Aging time
Construction life (℃)
Special diluent
Maximum dilution %
Construction method: high-pressure airless spraying, manual brushing, Roller coating.
Paint film thickness wet film dry film
Overcoating time ℃ hours or more.
Surface treatment removes dust and stains on the surface of the primer. Apply this topcoat within the time specified for the previous coat.
Construction Conditions The two-component paint must be fully stirred and mixed according to the specified mass ratio before construction. The surface temperature of the substrate should be higher than the dew point by ℃. Generally, the best construction temperature for this type of paint is between ~℃. During construction, attention should be paid to weather and temperature changes. In rainy, foggy, and snowy days, the relative humidity should be less than %. In hot summer weather, construction should not be carried out under strong direct sunlight.
Matching anti-corrosion paint primer, epoxy primer
Packaging specification paint (component A). Liter container ㎏ curing agent (component B) liter filling
Suggestions Number Two
This product should be stored in a cool, dry, and ventilated indoor warehouse. The storage period at room temperature is one year.
Pay attention to ventilation at the construction site, strictly prohibit fireworks, and keep away from open flames, heat sources, and oxidants. Paint construction workers should wear protective equipment during construction to avoid long-term inhalation of solvent vapor or paint mist to prevent damage to the skin and eyes. Wash skin with soapy water immediately, and rinse eyes thoroughly with water immediately. If you swallow it by mistake, induce vomiting with warm water and then seek medical examination.
The service life and anti-corrosion effect of the knee membrane depend on factors such as surface treatment during painting construction and paint film thickness. Users should meet the requirements of surface treatment and construction conditions when using it.
The number of coats of this coating should be determined according to the use environment and design requirements, and the final thickness of the coating film should be determined by the design specifications.
The relevant data in this manual are theoretical values or accumulated through experiments. Actual product may vary slightly.
This manual is an annual user guide, and the information contained will change with the development of technology.
Qingdao Baiwei Paint Co., Ltd.
Qingdao Runmeijia Anticorrosive Coating Co., Ltd.
Sales Manager Liu Changjiang
Mobile phone
Landline
Email@
Address: Ankang Road, Huangshan Economic Zone, Wangtai, Huangdao District, Qingdao