Yantai epoxy zinc-rich primer manufacturer

Yantai epoxy zinc-rich primer epoxy zinc-rich primer dosage per kilogram of epoxy zinc-rich primer. In the case of a dry film thickness of microns, the actual coating area is about square meters. The theoretical coating rate is about square meters. There are slight differences depending on the shape of the substrate, construction method, etc.
Epoxy zinc-rich primer manufacturer Bowei Paint Co., Ltd. produces epoxy zinc-rich primer, and corresponding matching epoxy mid-coat, epoxy zinc-rich primer matching topcoat (, epoxy topcoat, acrylic paint, chlorinated rubber paint, polyurethane paint, fluorocarbon paint, etc.)
Bowei Epoxy Zinc-Rich Primer Instructions
Epoxy Zinc-Rich Primer English Name
Epoxy Zinc-Rich Primer Implementation standards
, epoxy zinc-rich primer color zinc gray (gray)
, epoxy zinc-rich primer specific gravity is about./
, packaging specification +./group (i.e. kg main Paint matching. Kilogram curing agent) +./group
, epoxy zinc-rich primer diluent, special thinner for epoxy paint, Bowei's proprietary formula/barrel./barrel.
The conventional proportioning group paint is matched with a set of thinner
, and the film thickness of the epoxy zinc-rich primer
As the dry film thickness of the anti-corrosion primer, one micron, one micron
As a workshop Primer dry film thickness, one micron
, Epoxy zinc-rich primer construction technology
Epoxy zinc-rich primer construction can be done by airless spraying, air spraying or brushing, special epoxy matching Thinner, the ambient temperature must not be lower than ℃, and the relative humidity should be less than %.
,Surface treatment
Completely remove oil, rust, and sand on the surface of the object. The steel surface needs to be sandblasted and rust-removed, and it is required to meet grade 1 standards.
, Paint film requirements
Recommend the thickness of each coating. Micron as a shop primer.
, Usage
The ratio of component one to component two is: The two components are stirred evenly and matured in 10 minutes before construction and use. The paint can be used as soon as it is mixed. The mixed paint should be used within 1 hour. run out.
During winter construction, sufficient curing time should be ensured and a small amount of thinner should be added to avoid sagging.
Qingdao Baiwei Paint Co., Ltd.
Qingdao Runmeijia Paint Co., Ltd.
Liu Jing, Sales Department
Screenshot