Dongying epoxy cloud iron mid-coat paint manufacturer

Dongying Epoxy Mica Iron Intermediate Paint Manufacturer
Product Performance
Component A consists of epoxy resin, scaly mica iron oxide, anti-rust pigments, additives, solvents, etc. Part B amine curing agent.
Excellent rust resistance and corrosion resistance from chemical media.
It has good sealing properties, heat resistance and compatibility with various topcoats.
Good physical and mechanical properties.
Scope of application
Suitable for anti-corrosion primer coating on ships, containers, bridges, gas tanks, port machinery, various steel structures, concrete, etc.
Apply zinc-rich primer and coating.
Physical parameters
Color gray, maroon
Glossy and matte
Theoretical coating rate primer/㎡ (based on dry film, excluding loss)
Specific gravity approx.
Flash point ℃
Drying time ℃ Surface dry and fully cured
Construction instructions
Mixing ratio of component A (paint) to component B (curing agent) (weight ratio)
Curing time (℃)
Construction life (℃) hours
Thinner Epoxy thinner
Dilution amount ~ %
Construction method brushing, roller coating, airless spraying .
Nozzle hole discharge pressure/
Overcoating time
Substrate temperature
℃
℃
℃


Tool cleaning epoxy thinner
Surface treatment Steel surface treatment is performed as per. Shot blasting or sandblasting up to grade . Or manual and power tool rust removal up to grade . The surface after rust removal should be free of oil and dust before painting. And paint it immediately to avoid secondary rust.
For paint surfaces coated with zinc-rich primer, impurities such as zinc salts, grease, dirt, dust, etc. should be removed.
Construction conditions: The relative humidity is below %, and the surface temperature of the substrate is above the dew point by ℃. When the temperature of the construction substrate is lower than ℃, construction cannot be carried out.
Front-end supporting coatings include high-performance water-based inorganic zinc silicate coatings, epoxy zinc-rich primers, and epoxy anti-rust primers.
The back-end supporting coatings include anticorrosive coating topcoat, chlorinated rubber topcoat, acrylic polyurethane topcoat, and high chlorinated polyethylene anticorrosive coating topcoat.
Packaging specifications: paint (component A), liter container (kg), curing agent (component B), liter container (kg).
This product should be stored in a cool, dry and ventilated indoor warehouse. The storage period at room temperature is one year.
Pay attention to ventilation at the construction site, strictly prohibit fireworks, and keep away from open flames, heat sources, and oxidants. Paint construction workers should wear protective equipment during construction to avoid long-term inhalation of solvent vapor or paint mist to prevent damage to the skin and eyes. Wash skin with soapy water immediately, and rinse eyes thoroughly with water immediately. If you swallow it by mistake, induce vomiting with warm water and then seek medical examination.
The service life and anti-corrosion effect of the knee membrane depend on factors such as surface treatment during painting construction and paint film thickness. Users should meet the requirements of surface treatment and construction conditions when using it.
The number of coats of this coating should be determined according to the use environment and design requirements, and the final thickness of the coating film should be determined by the design specifications.
The relevant data in this manual are theoretical values or accumulated through experiments. Actual product may vary slightly.
Qingdao Baiwei Paint Co., Ltd.
Qingdao Runmeijia Anticorrosive Coating Co., Ltd.
Sales Manager Liu Changjiang
Mobile phone
Landline
Email@
Address: Ankang Road, Huangshan Economic Zone, Wangtai, Huangdao District, Qingdao