Dongying floor paint, Dongying topcoat, Dongying epoxy paint

Product properties of Dongying floor paint, Dongying topcoat, and Dongying epoxy paint
Component A is prepared by grinding special epoxy resin, toughening agent, modified resin, pigments, and fillers. Part B special curing agent.
It has good substrate adhesion and construction performance. After the coating is damaged, it can be partially repaired and repaired quickly.
Outstanding corrosion resistance, able to withstand corrosion from most acids, alkalis, and salts. High strength and wear resistance, excellent resistance to water penetration and solvent resistance.
It is a cross-linked normal temperature cross-linked curing coating, which dries quickly and is easy to construct.
Scope of application
It is suitable for the pharmaceutical industry, food industry, and hospitals, which require clean and easy-to-clean building floors, and can meet domestic and international requirements for the construction and use of clean factories in the pharmaceutical and food industries.
It is suitable for the aerospace industry, automobile industry, electronic instrument industry, etc. that require clean, wear-resistant and impact-resistant building floors.
Physical parameters
Various colors
Glossy matte to bright rough to smooth
Drying time bottom, medium and surface dry
Curing time days
Specific gravity Approximately.~
Construction instructions
Mixing ratio group B material
Bottom
Middle layer.~
Surface
Construction method: roller coating, scraping coating, airless Spraying
Thinner Special thinner
Usage amount Brush path theoretical coating rate
Bottom.㎏/㎡
Middle.㎏/㎡
Surface.㎏/㎡< br/>The above dosage does not include the dosage of aggregate. The use of intermediate paint and topcoat should be adjusted as needed. The specific dosage is subject to the actual situation. The recoating time during the construction of primer, midcoat and topcoat is hours (°C).
Surface treatment The newly completed concrete floor must undergo a certain drying and curing period before construction. It takes about days in summer and about days in winter. Before construction, it should be measured with a moisture meter. Construction can only be carried out when the dryness is below %. .
Construction conditions Good sealing conditions must be ensured during construction to prevent dust from entering. The coating surface must be dry, dust-free and oil-free, and must be clean. Construction is strictly prohibited in foggy, rainy days and when the ambient humidity exceeds %. The optimal construction temperature is ~℃.
Supported within the system.
Packaging Specifications Literated Drum Group B Literally Packed
Storage This product should be stored in a cool, dry and ventilated indoor warehouse, with a storage period of one year at room temperature.
Safety: All fire sources are strictly prohibited at the construction site and good ventilation must be maintained. Paint construction workers must wear protective equipment to prevent inhalation of paint mist from damaging their eyes and skin. If paint splashes on your skin, wash it immediately with soapy water. If paint splashes on your eyes, rinse immediately with plenty of water and seek medical attention.
Qingdao Baiwei Paint Co., Ltd.
Qingdao Runmeijia Anticorrosive Coating Co., Ltd.
Sales Manager Liu Changjiang
Mobile phone
Landline
Email@
Address: Ankang Road, Huangshan Economic Zone, Wangtai, Huangdao District, Qingdao