Qingdao alkyd enamel paint Qingdao paint color matching

Qingdao alkyd enamel paint Qingdao paint color mixing introduction
Alkyd enamel paint is the most common paint on the market used for outdoor iron art, railings, gates, etc. Usually used with alkyd anti-rust paint. Alkyd enamel, also called topcoat, is a paint made from alkyd resin, or other alkyd-modified synthetic resins, etc., with main coloring pigments such as titanium dioxide and a small amount of extender pigments (the color is very pure).
Color
Commonly used colors of alkyd enamel include bright red, white, beige, orange, sky blue, phthalocyanine blue, etc. The color can be customized according to the R color card and B paint film standard color card color number.
Composition
This product is formulated from alkyd resin, drier, pigment and solvent.
Characteristics
Alkyd enamel has good weather resistance, gloss and hardness, bright color, good adhesion to metal and wood, and certain water resistance.
Usage
It is suitable for indoor and outdoor ferrous metal surface and wood surface protection and decoration. It is a general-purpose paint and is widely used in construction, machinery, vehicles and various decoration industries.
Technical requirements
% dd project
dd technical indicators
dd inspection method
dd status in the container
dd After stirring and mixing, there are no hard lumps and the state is uniform
br/> dd .
dd drying time, h
not greater than
dd surface dry
dd
dd
dd solid dry
dd
dd
dd viscosity, not less than
dd
dd
dd fineness, mm not greater than
dd
dd .
dd covering Force,/m is not greater than
dd
dd
dd bending test, mm is not greater than
dd
dd
dd water resistance, h
dd No blistering, cracking or peeling. Slight whitish allowed. The gloss retention rate after immersion in water is not less than
dd.
dd Resistance to volatile oil, h
dd No blistering, no wrinkles, no cracking, no peeling.
dd .
Construction reference
Brush coating, roller coating, spray coating, and high-pressure airless spraying can be used.
After fully stirring the product evenly, apply it on the metal or wood surface coated with primer. The thickness of each layer should be mm. The next layer can only be applied after the previous layer is dry.
For matching primers, use alkyd primer, epoxy ester primer, phenolic primer, etc.
In order to ensure the construction quality, it is recommended to use matching diluent.