Year1
This paint has strong binding force when matched with primer and enamel paint, and has low water vapor penetration. It is an excellent shielding protective paint and can be sprayed in one time The film has high thickness and excellent anti-corrosion performance when used in conjunction with it. It is suitable for the steel structure surfaces of bridges, containers and port facilities. It is usually used in conjunction with zinc-rich primers.
Manufacturer parameters
Packaging: kg paint + .kg curing agent (packaging specifications are subject to change, subject to actual production)
Color: taupe, slightly mica gloss
Price : Comprehensive negotiation based on one-time quantity and delivery location
Dosage: Actual calculation can be based on square meters/kg, mm dry film thickness
Applicable: Steel structure surfaces coated with epoxy primer, zinc-rich primer. It can also be used directly on bare steel surfaces.
Thinner: epoxy thinner, kg per group. Two sets of paints come with a bucket of thinner.
Composition
Epoxy mica iron anti-rust paint is a two-component paint. Epoxy resin, mica iron oxide, anti-rust pigment and organic solvent are the first component. The curing agent is component two.
Uses
Epoxy mica anti-rust paint can be used as the connecting paint and mid-coat of anti-corrosion primers with high zinc powder content such as epoxy zinc-rich primers. .
It can be used as the middle layer of high-performance topcoats such as acrylic polyurethane topcoat and fluorocarbon topcoat. It can not only increase the thickness of the paint film, improve the anti-corrosion and anti-rust properties, but also extend the service life. , and can improve the decorativeness of the surface and improve the brightness, smoothness and fullness of the paint film surface.
Epoxy mica iron anti-rust paint has good sealing performance and is suitable for humid environments, underwater environments, etc. It can be used in high humidity, humid heat when matched with epoxy primer and epoxy topcoat. Anti-corrosion and anti-rust steel structures in alternating and other environments.
Technical requirements
% dd project
dd technical indicators
dd inspection method
dd paint film color
dd taupe, flat
dd < br/> dd solid content,
dd
dd
dd flexibility, m
dd
dd
dd adhesion, grade
dd
dd
dd Impact strength,
dd
dd
dd Drying time, H
dd Surface dry
dd
dd < br/> dd hard work
dd
dd water resistance
dd allows whitening and recovery within hours
dd
construction reference
, epoxy cloud iron Before applying anti-rust paint, clean the surface to be applied, remove scale, rust and other impurities with sandblasting and rust removal, and sandblast to grade .
The two components are mixed according to weight ratio before construction, stir evenly, and apply after a few minutes.
The epoxy mica anti-rust paint is ready for use. The mixed paint must be used up within hours.
The application requirements between the two coats Wait until the lower layer is dry.
The main paint and curing agent must be strictly in accordance with the ratio of one bucket of paint to one bucket of curing agent. Otherwise, it is easy to fail to dry, dry too fast, and the paint film will wrinkle. Anticipate paint defects.
The ratio of the epoxy mica anti-rust paint diluent should be adjusted to the appropriate construction viscosity. There will be slight differences according to the temperature and humidity of the customer's construction environment.
Product matching
Matching primer
Epoxy iron red primer, epoxy light gray primer, epoxy zinc-rich primer Paint, epoxy zinc yellow primer, fluorocarbon special primer, acrylic primer, inorganic zinc-rich primer.
Matching topcoat
Polyurethane topcoat, acrylic polyurethane topcoat, epoxy topcoat, fluorocarbon topcoat, chlorinated rubber topcoat, etc.
WhatsApp
