Jining steel structure water-based inorganic zinc-rich primer manufacturer

rb r Jining steel structure water-based inorganic zinc-rich primer manufacturer
r<>
rb r Product Features<>
rb r Diluted with water, environmentally friendly and non-toxic. Zinc powder has cathodic protection and excellent anti-rust properties. The paint film dries quickly and can be transported and stacked in a short time. It can withstand high temperatures
r
r°C, has small burnt area during welding and cutting, and has excellent welding performance and cutting performance. Can be matched with most paint systems. <>
rb rCoating method<>
rb rAirless spray thinner Tap water
r
rDilution rate
r
rBased on paint weight Pay attention to prevent dry spray<>
rb rThe nozzle diameter is about
r
rThe spray pressure
r
r is about
r
r ∕
r
r<>
rb rAir spray thinner tap water
r
rThinning rate
r
rBased on paint weight Pay attention to prevent dry spray<>
rb rNozzle diameter is about
r
rAir pressure
r
rApproximately
r
r∕< br/> r
r<>
rb rRoller/brush thinner tap water
r
rThinning rate
r
rBased on paint weight Calculated<>
rb rStorage period<>
rb rStore in a cool, dry and ventilated place. Valid storage period
r
r months. <>
rb rNotes<>
rb r
The paint should be mixed thoroughly, otherwise, the zinc powder will easily agglomerate when exposed to water, affecting the construction and the surface of the coating film. Effect. <>
rb r
During construction, use a mixer to stir continuously to prevent precipitation of zinc powder. It is prohibited to mix any organic diluent during the construction process. The temperature during construction is controlled at
r
r℃ . Relative humidity is controlled at
r
r. When the humidity is too low, watering is required to cure. Before applying the next coat of paint, the paint film of the inorganic zinc-rich primer must be completely cured, otherwise the adhesion between layers will be affected. <>
rb r
The surface of zinc-rich primer can form zinc salts, also known as white rust, and should not be exposed for a long time before applying the subsequent paint. If a longer coating interval is required, it is recommended to apply an intermediate layer of paint as a sealing layer as soon as possible to reduce the workload of secondary rust removal.
r<>