Wood drying equipment||Small wood drying equipment manufacturer

Wood Drying Equipment||Small Wood Drying Equipment Manufacturer Features: Hot air steam wood drying complete set of equipment adopts a cycloidal heating device, which is a clean hot air and steam separated operation, which can generate a large amount of hot air and superheated steam in a short time. It enables the wood to reach the predetermined temperature and humidity, eliminates discoloration, deformation and other phenomena of the wood, and improves the quality and output rate of the wood. The main features of this equipment are as follows: 1. Use a unique steam generating device to ensure that sufficient steam is supplied to the drying kiln In the early stage of drying, a large amount of steam enters the room, increasing the indoor humidity to prevent the wood from deforming and drying out. , Drying wood has the characteristics of short drying cycle, low cost, uniform drying and good effect. It solves the defects such as internal cracking, fracture, surface cracking, deformation and discoloration that occur during the drying process of wood, and the yield rate can reach up to 10%. It is suitable for drying all kinds of wood, especially suitable for drying medium and high-grade wood. The moisture content of the wood after drying can reach up to 100%. , Use pipe air supply, eliminate radiators, no need for circulating water for drying, fast heating speed, easy start and stop, and no pressure. , Investment savings, low operating costs, low maintenance costs, and high drying and heating effects. , Use sawdust, wood chips, coal, etc. as fuel required for combustion.