Professional customization of power plant coal bunker linings

密度：

0.99

Ningjin Taida Rubber and Plastic Co., Ltd. specializes in the production of coal bunker linings, silo linings, and mixer linings. Ultra-high molecular weight polyethylene sheet is an engineering plastic with excellent properties, such as extremely high wear resistance and impact resistance. performance, very low friction coefficient, good self-lubricating properties, excellent low temperature resistance, chemical corrosion resistance, etc. Several issues that need to be paid attention to when installing the coal bunker lining:
If the coal bunker lining is connected to the steel plate, it is necessary to drill a diameter hole on the coal bunker lining and use a special arc gasket to weld directly to the steel plate. Bolts can also be welded on the steel plate, and then holes are drilled on the lining plate, and connected with arc washers, nuts or countersunk screws.
If the coal bunker lining is connected to cement material, the condition of the bunker should be inspected. Any protrusions or dents on the coal bunker lining should be smoothed as much as possible, and the bunker should be cleaned thoroughly to prevent the coal bunker lining from being damaged. The board is not installed tightly or the board falls off.
Before installing the coal bunker lining, the installation process should be formulated according to the actual situation of the bunker and followed during installation. Before installing the lining board, the upper and lower edges should be beveled when cutting and cutting, and the joints between the boards should be overlapped and installed in a way that the upper and lower sides of the silo are overlapped and installed. activities to avoid or reduce the lag area.
The installation requirements of coal bunker linings vary according to local weather, bunker shape, size and other factors.