Anti-static epoxy floor undertaking anti-static floor project anti-static floor contracting materials

Thickness:
.. .. . Surface form:
Self-leveling trowel surface, roller coating surface, glossy type
Service life:
, years., years. years and above. years and above
br/> Floor characteristics
: Can eliminate and prevent static electricity or battery
Scope of application
: Electronics, computer production and packaging areas
Avoid static sparks and electromagnetic wave interference and destroy.
Telecommunications, electronics, computer control center
Construction technology:
, Waterproofing treatment: The ground on the first floor must be waterproofed
, Ground treatment: Repair according to the condition of the ground, Sand and dust.
Anti-static primer: Use anti-static epoxy primer with extremely strong penetration and adhesion to roll over once to enhance surface adhesion
Copper foil laying: Conductive copper foil is laid in a well shape to effectively eliminate accumulation. Anti-static, and conduct grounding treatment
, Anti-static mid-coat: Add an appropriate amount of quartz sand to the epoxy resin for anti-static mid-coat, and use a trowel to evenly coat it several times
, Anti-static soil batching : Anti-static soiling is carried out in two passes, which must be smooth and without holes, without knives and sanding marks
Anti-static topcoat: one pass with anti-static self-leveling trowel and two passes with roller coating, the volume of which is/ The average coefficient of surface resistance is ~. After completion, the entire floor will be bright and clean, with uniform color and no hollows.
. Construction is completed: people can only be put on the ground after a few hours, and can be pressed heavily after an hour. (Based on ℃, low temperature opening time needs to be extended appropriately)
Technical indicators:
Project
Indicators
Surface drying time

Solid drying time

Rolling surface: Pencil hardness Self-leveling: Shore hardness type
≧
Impact resistance ( /)
The coating has no cracks, peeling and obvious deformation
Wear resistance (/weight loss,)

Water resistance ()
No blistering, no peeling, Allow slight discoloration
Oil resistance (.)
No blistering, no shedding, slight discoloration allowed
Acid resistance ()
No blistering, no shedding, slight discoloration allowed
Salt water resistance (3,)
No blistering, no peeling, slight discoloration allowed
Bonding strength
≧3
Compressive strength
≧
Volume/surface resistance (ohms)