Year1
- 型号：
- zpf-827
- 规格：
- 见标签
Product Features
Good water resistance. The waterproof layer will not pulverize, crack or leak after being soaked in water for a long time after drying.
Strong adhesion. After the waterproof layer dries, ceramic tiles can be laid directly on the surface.
Water-based materials do not contain harmful substances and are more environmentally friendly, healthier and more secure.
Scope of application
Suitable for moisture-proofing, mildew-proofing, waterproofing and leak-proofing in various parts of new and old buildings.
Base surface treatment
The base surface should be a solid, flat, dust-free, and oil-free rough surface
The yin and yang angles should be made into arc-shaped pipe roots, wall roots, and joints should be reinforced first (Non-woven fabric can be added).
Construction ratio
Proportion according to components (liquid materials) components (powder materials) bags.
Pour the liquid into the container first, then slowly pour in the powder, and use a low-speed electric mixer to stir until a uniform mixed slurry without any lumps of dough.
If the slurry is too thick or the base is too dry, add an appropriate amount of water to dilute it when seasoning.
Construction method
Before construction, the base surface must be fully moistened with clean water, but no open water
Directly brush (roller coat) the prepared slurry on the base surface
The painting should be even, and the bottom should not be missed, and the coating should not leave blisters
Generally, it needs to be painted twice, and each coat should not be too thick to prevent cracks (especially at pipe roots and corners)
The second coat should be applied vertically and crosswise after the first coat is dry (usually about two hours apart).
Reference dosage
The total thickness of the coating is generally about mm, and the dosage value is about m2 (two The actual dosage, number of coats and thickness depends on the construction site, the roughness of the base surface, and the waterproofing engineering grade requirements.
Storage conditions
Must be cool and dry at ℃ ~ ℃. Sealed storage in a ventilated warehouse, with a shelf life of one month.
This product is a water-based product and can be transported as regular goods. During transportation, it should be protected from exposure, freezing, extrusion, and collision, and the integrity of the packaging should be maintained.
WhatsApp
