Supply Zhongpeng ceramic tile color grout

Ceramic tile color caulking agent is a special tile caulking agent, which is composed of raw materials imported from Germany, modified cement, synthetic resin and additives. After mixed with water for construction, it can improve the water resistance and solidity of the base surface, and has the functions of anti-mildew, anti-penetration, and anti-efflorescence.
Product Features
Ceramic tiles are water-absorbent and will undergo hydration expansion. Close adhesion will cause the tiles to arch, crack and fall off. Leaving gaps when pasting ceramic tiles can eliminate pushing and prevent the above adverse phenomena from occurring.
Anti-mildew: Good anti-mildew properties, can resist the erosion of common mold, algae and other organisms, and maintain the quality of ceramic tiles.
Waterproof
It has good waterproof properties and a certain degree of anti-penetration ability, which can effectively inhibit the production of white birch and keep the wall beautiful for a long time.
Strong
Good crack resistance and aging resistance. The flexibility is much higher than that of cement, and it has the function of adjusting the thermal expansion and contraction of ceramic tiles, making the ceramic tiles less likely to crack.
Efficient
The construction operation is simple and convenient, which can greatly increase the speed of home decoration and shorten the construction period of the construction project.
Beautiful
The color can be flexibly adjusted according to the color of the tiles, and the color is stable.
Environmentally friendly
The color is uniform and high-grade imported raw materials are used. It has no adverse effects on the human body.
Scope of application
Suitable for filling the joints of ceramic tiles, mosaics, natural stones, etc.
Construction technology
The surface of the base treatment joints should be free of oil, dust and other attachments
When the surface temperature of the joint is too high or too dry, the joint should be lightly moistened before construction.
Stirring and construction methods: Add this product to clean water, stir it with hand or electric tools into a uniform thick slurry without caking, and it is ready to use. Use a rubber scraper to spread the caulking agent in the diagonal direction of the brick surface. Press into the seam, and then scrape off the excess grouting agent on the surface. After a few minutes, use a slightly damp sponge or damp cloth to clean up the excess grouting agent on the surface of the tiles.
After a few minutes, wipe it with a dry cloth. Bright tile surface. The amount of caulking agent
depends on the specific conditions of the construction site, and the actual amount will vary.
Notes
,

Do not use acidic cleaners to clean filled tiles.

,

Cannot be constructed in the rain.
,

This product is suitable for use in
~ ℃ environment.

,

The gap width should be left
.
,

When constructing over a large area, it is advisable to leave expansion joints, which need to be cured once every
hour after construction and a
time after
hours.
,

The company recommends using the pointing method for construction of porous bricks, permeable bricks and unglazed bricks to avoid contamination of the brick surface. Use our company's adhesive for at least
hours and cement mortar for
hours before caulking. Make sure that there is no dust, grease or other debris in the brick joints to be filled. The tiling cement should not be squeezed into the brick joints too much to prevent the caulking agent from being too thin and affecting the product performance.