Year1
< : , r, 'r B', : > < r : > (polymer cement waterproof slurry)
/> < : >Product company code:
< : >Execution standard:
< : >Product model: Type II
< : >Product description:
< : : >This The product is a two-component waterproofing product made of high-performance synthetic acrylic emulsion from German BASF, Portland cement, quartz sand and a variety of waterproofing additives through scientific proportions. This product is mainly designed and developed to meet the waterproofing needs of kitchens and bathrooms. It not only solves the waterproofing problem of kitchens and bathrooms, but also takes into account the need to paste ceramic tiles on the waterproof layer.
< : >Product features:
< : >, Excellent bonding performance and excellent construction performance
< : >, Can be constructed on wet base surfaces
< : > , corrosion-resistant, aging-resistant, high and low-temperature resistant
< : >, non-toxic, harmless, odorless, non-polluting
< : >Application scope:
< : : >Particularly suitable for external stickers Tile bathrooms, kitchens, enclosed balconies and exterior walls are waterproof, anti-seepage and moisture-proof. It can also be used for:
< : >, anti-seepage treatment and leakage repair of industrial and civil buildings, moisture-proofing of floors
< : >, waterproofing and anti-seepage of aerated concrete walls
< : >, Adhesive for polystyrene insulation boards and ceramic tiles
< : >Construction instructions:
< : >1. Base surface treatment
< : :: >The base surface should be solid and clean , no hollows, no oil stains, wax stains, release agents or other loose objects
< : :: >The painted surface should be chiseled, exposing at least % of the original surface, and painted with a construction interface treatment agent
< : :: >Old concrete can be cleaned with industrial detergent or degreasing agent, and then rinsed with a high-pressure faucet
< : : > For loose and highly water-absorbent substrates or dust floating on the surface, it is difficult to completely clean On the surface, you can first apply Langcage architectural interface treatment agent for surface treatment, which can greatly improve the bonding strength
< : : >Honeycombs, holes, cracks on the base surface and around the upper and lower water pipes, etc. Use Langkaiqi Leak Plugging King to fill and smooth it. Sharp edges and protrusions should be eradicated, and nodes such as the yin and yang corners should be made into arc corners (yin angle R＞, yang angle R＞).
< : : >Before construction, the base surface should be fully moistened with water (but no open water).
< : >2. Operation method
< : >Slowly pour the powder into the matching emulsion, stir with an electric mixer while pouring, and stir thoroughly for ~ minutes until it forms a uniform consistency without any powder. slurry, let it sit for a few minutes to allow the slurry to fully mature and then stir for a few minutes.
< : >Use a brown bristle brush to apply the slurry evenly on the base surface that is fully moist but free of clear water. After the previous coat has solidified and developed sufficient strength, the next layer should be applied. The painting directions of each layer should cross each other perpendicularly.
< : > It is recommended to use ~g polyester non-woven fabric for reinforcement in large gaps and easy-to-deform cracks at the upper and lower water pipe interfaces. Spraying method can also be used for large-area construction.
< : >Notes
< : :: >. Construction must be on a wet base surface, but no open water
< : :: >. Construction environment temperature: ℃
< : :: >. Avoid exposure to the sun during summer construction
< : :: >. It should be used up within a short time after opening the package and should not be stored for a long time
< : :: >. Water storage test And pasting ceramic tiles should be done after the coating has dried and hardened. The winter period should be extended to at least.
< : :: >. If you need to paste ceramic tiles on the waterproof layer, it is recommended to use Langcage ceramic tile adhesive.
< : >Reference dosage
< : >. For moisture-proofing, apply once, thickness is about ., and dosage is about . : : b >
.
< : >. When used for waterproofing and impermeability, it must be applied more than twice, with a thickness of about .
< : : >Packaging
< : :: >Net content: barrel, barrel, barrel, group
< : : >Storage
< : :: >Original sealed product in Stored in a dry and cool environment, the product has a shelf life of one year.
< : : >Statement
:
< : :: >The use of this product is beyond the control of the manufacturer, and the company does not assume any responsibility for any losses caused by incorrect use. Please carry out construction in accordance with the instructions in the manual. If you have any questions, please consult our company's technical service department.
< : , r, 'r B', : >
< : , r, 'r B', : >
< : , r, 'r B', : .> Lang Kaiqi Construction Waterproof Materials, one of the top ten brands of waterproof materials, specializes in the production of various waterproof materials and bathroom waterproof material brand products. It is worthy of your choice. Welcome to consult as an agent to join
Construction waterproof material manufacturer Lang Kaiqi Waterproof Investment Hotline< br/>
WhatsApp
