Waterproof material waterproof material brand agent Langcage L-109 waterproof coating

r, 'r B', : > High permeability cement-based permeable crystal type
_ , r, 'r B', ::: > : >Waterproof coating
< r : , r, 'r B', : : >
< r : , r, 'r B', : : >rrrr
< r : , r, 'r B', : : >r
< : , r, 'r B', : >
< : , r, 'r B', : >Product mark: B
Product enterprise code:
Product execution standard: B
Product model:
< : , r, 'r B', : >
< : , r, 'r B', : >Product description:
< : , r, 'r B', : >The crystalline component of this product is compounded from imported osmotic crystallization masterbatch and crystalline components developed by the scientific research center. In addition, a variety of German WACKER high-performance waterproofing additives, high-strength cement, graded quartz sand and other raw materials are added. A high-permeability cement-based crystalline type_::: > : >Waterproof coating
formed through scientific preparation and mixing. The material is rich in crystalline components that are extremely active, can be completely dissolved in water, and use water as a carrier to penetrate deeply into the pores and cracks of concrete
, and interact with other materials inside the concrete. The active substance reacts quickly to form strong white crystals that are insoluble in water, thereby blocking the pores and small gaps in the concrete to achieve the effect of enhancing the density of concrete and making it waterproof
. Especially during the wet and dry cycle of concrete, this effect will continue, thus playing a permanent waterproofing role.
< : , r, 'r B', : >
< : , r, 'r B', : >Product features:
< : , r, 'r B', : >, non-toxic, environmentally friendly, and can be safely used in drinking water and other projects.
< : , r, 'r B', : >, has excellent high temperature resistance, moisture resistance, aging resistance, carbonization resistance, UV resistance, freeze-thaw resistance, shrinkage resistance, crack resistance, and radiation resistance.
< : , r, 'r B', : >, high permeability, strong chemical penetration and catalytic crystallization capabilities, giving the concrete base layer excellent impermeability.
< :, r, 'r B', : >. It has extremely strong self-healing ability. The unique active substances in the product are activated when exposed to water, prompting the cement to produce new crystals, which can be blocked. The following cracks, thereby blocking the water.
< :, r, 'r B', : >. The coating can resist corrosion from various chemicals (including weakly acidic substances, alkaline substances, chlorides, gasoline, diesel, etc.) and can significantly improve the concrete quality. of durability.
< : , r, 'r B', : >, It has superior self-breathing function. The crystals produced can block the penetration of water but do not block the passage of gas, and do not affect the breathing of concrete.
< : , r, 'r B', : >
< : , r, 'r B', : >
< : , r, 'r B', : >
< :, r, 'r B', : >Application scope:
< :, r, 'r B', : >Large_::: > : >Concrete
structure, such as basement , civil air defense projects, floors, water towers, reservoirs, etc. flat and facade_::: > : >Waterproof
. It can also be used to waterproof and moisture-proof cast-in-place concrete roofs of ordinary houses, and to waterproof walls and floors such as bathrooms and kitchens.
< : , r, 'r B', : >
< : , r, 'r B', : >Construction method:
< : , r, 'r B', : >1. Base treatment
< :, r, 'r B', : >The base surface is smooth and has no structural defects, has high compressive and flexural strength, and has no laitance, dust or pollutants.
The base layer must have no hollows, honeycomb holes and cracks larger than .mm wide (especially ductile cracks caused by foundation settlement). If there are any, synthetic resin mortar or Langcage_::: > : > Leak plugging
The slurry must be repaired in advance, and the yin and yang angles must be pre-processed into arcs or obtuse angles.
Before applying the paint, fully wet the base surface with water, but there should be no open water when painting.
< : , r, 'r B', : > 2. How to use b>
< : , r, 'r B', : > Slowly pour a bag of powder into the electric Stir in clean cold water with a mixer (smearing method: water brushing method: water) and stir until even and particle-free. Let the slurry sit for a few minutes, stir once more, and the slurry is ready to use. Apply at least two coats criss-cross. When the previous coat has cured and developed sufficient strength, the next coat can be applied. The prepared slurry should be used within hours. Coatings for outdoor construction in summer should be sprinkled and cured after 1 hour, and generally cured the next day. Where conditions permit, moist geotextiles, sacks, straw bags, etc. should be used for maintenance. High-pressure spraying can also be used for construction.
< :, r, 'r B', : >Note: Product performance testing ratio: powder: water:
< :, r, 'r B', : >
< : , r, 'r B', : >Notes
< : , r, 'r B', : >Add water strictly according to the proportion specified in this instruction. Do not add more water at will, otherwise it will cause the coating to become powdery. , low strength and other consequences
< : , r, 'r B', : >. Construction must be done on a wet base surface, but no open water.
< :, r, 'r B', : >, Construction ambient temperature: ~℃.
< :, r, 'r B', : >, Summer construction should avoid exposure to the sun. Construction is strictly prohibited when there is frost in winter, and anti-freeze measures must be taken for those already under construction.
< : , r, 'r B', : >. Sprinkling and curing should be carried out hours after the construction is completed.
< :, r, 'r B', : >. It should be used up within a short time after tearing open the package and should not be stored for a long time.
< :, r, 'r B', : >, water storage test or tiling should be carried out after the coating has dried and solidified, and the low temperature period in winter should be appropriately extended.
< :, r, 'r B', : >. If you need to paste ceramic tiles on the waterproof coating, it is recommended to use ceramic tile adhesive or low-grade cement mortar
.
< : , r, 'r B', : >
< : , r, 'r B', : >
< : , r, 'r B', : >Reference dosage
< :, r, 'r B', : >Used for_::: > : >Waterproofing project
Generally, it takes about ~. per square meter (two coats of painting).
< : , r, 'r B', : .>
< : , r, 'r B', : >Transportation and storage
< : , r, 'r B', : >This product is a non-flammable and explosive material and can be transported by normal transportation methods. During transportation, it should be protected from rain, exposure to the sun, antifreeze, and packaging damage. The product should be stored in a dry, ventilated, and cool place, and the storage temperature of the liquid components should not be lower than ℃. Under normal storage and transportation conditions, the product shelf life is one year.
< : , r, 'r B', : >Packaging:
< : , r, 'r B', : >Barrel (hardcover) bag (common packaging)
< : , r, 'r B', : >
< : , r, 'r B', : >
< : , r, 'r B', : .> Langcage building waterproofing materials, waterproof One of the top ten brands of materials, specializing in the production of various waterproof materials, bathroom waterproof material brand products, worthy of your choice, welcome to consult as an agent to join
Construction waterproof material manufacturer Langkaiqi waterproof investment hotline