Zhongshan single-component polyurethane coating bathroom caisson coating waterproof coating wholesale

Look for Qinglong for waterproofing in Zhongshan! Qinglong is waterproof, environmentally friendly and moisture-free! National hotline:, hourly mobile phone number:, company address: No. 3, Taojin Haoting, Dongming Road, Shiqi District, Zhongshan City, Zhongshan Province.
Introduction to Zhongshan single-component polyurethane coating materials
Qinglong brand one-component moisture-curing pure polyurethane waterproof coating is a new type of pure polyurethane waterproof coating that introduces the latest foreign technology and is produced using imported processes and raw materials. It overcomes the The two-component polyurethane waterproof coating must be prepared on-site before use, and uneven deployment will cause shortcomings such as reduced performance.
Main features
Pure polyurethane. After coating, the paint absorbs the moisture in the air and the base layer and solidifies into a film. It is a new generation of environmentally friendly product
. It is especially suitable for use on wet base surfaces and Waterproof construction of complex structures, no solvent, self-leveling
The construction is safe and convenient, single-component construction does not require mixing, the coating is tough and highly elastic after curing
, stable performance, heat and cold resistance (-℃-℃ ), chemical corrosion resistance, aging resistance
, strong bonding force, can bond concrete, masonry, wood, glass, metal, rubber and other base materials
, the basic color is brown-red, can be painted The membrane surface is painted with various colors.
The scope of application of Zhongshan one-component polyurethane coating
is the flat and sloped roofs of buildings, gutters, awnings and various irregular roofs, especially the waterproofing of roofs, overpasses and sports fields that require beautiful appearance. Treatment
Can be used in various water conservancy projects, such as water canals, waterproofing and sealing of construction projects
Waterproofing and moisture-proofing of indoor and outdoor walls, decorative chemical plants, steel plants, power stations and other corrosive environments Roofs and external anti-corrosion with acid, alkali, salt and oil pools
Engineering construction of indoor floors, toilets, bathrooms, gardens, flower beds, hot spring pools, swimming pools, sewage treatment pools and cold storage floors
/> , Sealing and waterproofing of various doors, windows, wall pipes, and cracks
, Anti-corrosion, anti-rust, and waterproof treatment of metal and water pipe surfaces, and galvanized sheet roofs.
Construction method
Remove debris, stains, and dust on the base surface. The area where this product is applied should be strong, clean, and free of open water
Use this product first if the cracks in the base layer are smaller than Thick coating sealing
The metal surface must be derusted before applying this product
. Do node treatment first, and then use appropriate tools such as plastic or rubber scrapers to evenly apply this product on the cleaned base. On the surface
, if the coating thickness is greater than 100%, it can be applied in separate passes. The time interval between each application shall be based on the previous coating being dry and not sticky to the hand. The application directions should be perpendicular to each other
. Reference dosage :(.thick). -. /㎡(.thickness). -. /㎡(.thickness). -. /㎡.
Precautions
. It should be sealed immediately after opening to prevent moisture absorption and solidification and scrapping. It is recommended to use it up once after opening.
When the product is stored for a long time, a layer of paint will form on the surface of the paint. A thin layer of glue should be removed during use without affecting the use
The thickness of the coating film should be uniform and tightly sealed. No phenomena such as bottom exposure, bulging, falling off, cracking, edge warping, and lax sealing at the end are allowed
, The construction temperature should be above ℃, and the construction environment should maintain air circulation.
Zhongshan one-component polyurethane coating storage, transportation and packaging
This product is non-dangerous, non-toxic, tasteless, does not pollute the environment, and can be safely transported
When storing, please pay attention to sealing and Store in a ventilated, cool and dry place indoors
The shelf life of the product is months
and is packaged in kg or kg iron drums.
Warm reminder: The company always adheres to the business philosophy of customer satisfaction and social recognition, sincerely cooperates with friends from all walks of life, and is willing to make contributions to my country's chemical building materials industry with high-quality products, professional construction technology, and a complete after-sales service system. greater contribution. For more product information, please go to the official website::