Year1
< : , r, 'r B', : >
< : , r, 'r B', : > Product enterprise code:
< :, r, 'r B', : >Execution standard: B
< :, r, 'r B', : >Product model: Type II
< : , r, 'r B', : >
< : , r, 'r B', : >Product description:
< : , r, 'r B', : >This product adopts Acrylic polymers and high-strength cement imported from the United States are the main raw materials, and are scientifically formulated by adding imported high-performance waterproofing additives and other auxiliary materials. The coating formula has been optimized. After the coating is solidified into a film by water evaporation and hydration reaction, it has excellent waterproof performance and excellent ductility. It is suitable for waterproofing and moisture-proofing of buildings with slight vibration and deformation. This product is a two-component product.
< : , r, 'r B', : >
< : , r, 'r B', : >Product features:
< : , r, 'r B', : >◆ It has strong adhesion and can be applied directly to wet base surfaces.
< : , r, 'r B', : >◆ The coating film has high strength, large elongation, and strong adaptability to base layer shrinkage, deformation and cracking.
< : , r, 'r B', : >◆ Excellent anti-aging performance, can be used_::: > : >Roof waterproofing
.
< : , r, 'r B', : >◆ You can plaster, paste ceramic tiles, etc. directly on the dried waterproof membrane of this product.
< : , r, 'r B', : >◆ Water-based coating, non-toxic, environmentally friendly, and can be used for waterproofing in drinking water projects.
< : , r, 'r B', : >◆ Skin-type waterproof, the coating is breathable and impermeable.
< : , r, 'r B', : >◆ Cold construction, easy construction and maintenance, the moisture content of the base layer is not limited, and the construction period can be shortened.
< : , r, 'r B', : >
< : , r, 'r B', : >Application scope:
< : , r, 'r B', : >◆ Waterproofing of concrete and prefabricated structures, brick-concrete walls and other flat surfaces.
< : , r, 'r B', : >◆ Underground parking lots, tunnels, water supply and drainage pipes, floors, flat_::: > : >Roofs
, sloped roofs, terraces, old roofs Waterproofing of renovation projects, swimming pools, drinking water pools and other buildings. Waterproofing of buildings where slight vibrations may occur and waterproofing enhancement treatments around pipe openings, concrete post-cast belt interfaces, joints or expansion joints, etc.
< :, r, 'r B', : >◆_::: > : >Home decoration
Project anti-seepage, _::: > : >Moisture-proof
. For example, waterproof wallpaper in kitchens and bathrooms, moisture-proof and mildew-proof base surfaces of wooden floors, moisture-proof floors, etc.
< : , r, 'r B', : >
< : , r, 'r B', : >Construction method:
< : , r, 'r B', : >1. Base surface treatment
< :, r, 'r B', : >◆The base surface must be solid, flat, free of dust, oil, shedding and other loose objects.
< :, r, 'r B', : >◆The pits and honeycomb holes on the base surface, and gaps larger than the above width, must be sealed with_::: > : >Leak-plugging King
The slurry should be filled and smoothed, and protrusions on the base surface should be removed. The yin and yang angles and complex node parts should be made into arc angles (yin angle R>, yang angle R>).
< :, r, 'r B', : >◆Before construction, fully wet the base surface with water (but there should be no accumulation of water).
< : , r, 'r B', : >
< : , r, 'r B', : >2. How to use
< : , r, 'r B', : >◆Now pour about % of the emulsion into the bucket, and then slowly pour all the powder into it, stirring while pouring. Stir thoroughly for ~ minutes, pour the remaining emulsion into the stirred slurry, and stir for about another minute before use. The prepared slurry should be used up within hours.
< : , r, 'r B', : >◆Use a brown-bristled brush to evenly apply the slurry on the wet but water-free base surface, taking care to avoid brush leakage. When the previous coat has cured and developed sufficient strength, apply the next layer. If there is a finishing layer on the surface, it is recommended that the last waterproof layer should be horizontally drawn with a brown brush to improve the adhesion. The painting directions of each layer should cross each other at right angles.
< :, r, 'r B', : >◆It is recommended to use fiberglass mesh cloth for reinforcement in areas with large gaps. If it is an assembly joint or a deformation joint of prefabricated parts, it is recommended to lay a wide layer of non-woven fabric strips or plastic film over the crack, and then apply this product on it and connect it with the surrounding coating. This can effectively play a role. The elongation performance of this product prevents the coating film from being pulled apart due to deformation of the base surface.
< : , r, 'r B', : >
< : , r, 'r B', : >Notes
< : , r, 'r B', : > ◆Construction must be done on a wet base surface, but no open water.
< :, r, 'r B', : >◆Construction ambient temperature: ~℃.
< :, r, 'r B', : >◆ Avoid exposure to the sun during summer construction, and construction is strictly prohibited in frosty weather.
< :, r, 'r B', : >◆It should be used up within a short time after tearing off the package and should not be stored for a long time.
< :, r, 'r B', : >◆The water storage test or tiling should be carried out hours after the coating has dried and solidified, and the low temperature period in winter should be appropriately extended.
< :, r, 'r B', : >◆If you need to paste ceramic tiles on the waterproof coating, it is recommended to use ceramic tile adhesive or low-grade cement mortar
paste.
< : , r, 'r B', : >
< : , r, 'r B', : >Health and safety:
< : , r, 'r B', : >◆This product contains cement components, which can be irritating to the skin. Avoid inhaling dry powder during construction.
< : , r, 'r B', : >◆When necessary, please wear appropriate personal protective equipment, such as gloves, goggles, dust masks, etc.
< : , r, 'r B', : >◆If this product comes into contact with skin, rinse with clean water. If it comes into contact with eyes, rinse immediately with clean water and seek medical attention.
< :, r, 'r B', : >◆Prevent children from accidentally eating.
< : , r, 'r B', : >
< : , r, 'r B', : >Reference dosage:
< : , r, 'r B', : >◆For_::: > : >moisture-proof
, apply a layer of paint with a thickness of about .~., and the flat base surface is about . : : b >
.
< :, r, 'r B', : >◆Used for_::: > : >Waterproof
, it must be painted with more than two layers, the thickness is about .~., and the flat base surface is about. : : b >
.
< : , r, 'r B', : >
< : , r, 'r B', : >Transportation and storage:
< : , r, 'r B', : >◆This product is a non-flammable and explosive material and can be transported as general cargo. During transportation, prevent rain, exposure to the sun, and freezing, avoid squeezing and collision, and keep the packaging intact.
< : , r, 'r B', : >◆The product should be stored in a dry, ventilated, and cool place, and the storage temperature of the liquid components should not be lower than ℃.
< :, r, 'r B', : >◆The product has a storage period of one year from the date of production under normal transportation and storage conditions.
< : , r, 'r B', : >
< : , r, 'r B', : >Packaging specification:
< : , r, 'r B', : >Net weight: barrel
< :, r, 'r B', : >Liquid material: powder material: (blue liquid material, white powder material)
< :, r, 'r B' , : >
< : , r, 'r B', : >
< : , r, 'r B', : .> Langcage construction waterproofing materials, one of the top ten brands of waterproofing materials , specializing in the production of various types of waterproof materials, bathroom waterproof material brand products, worthy of your choice, welcome to consult agents to join
Construction waterproof material manufacturer Langkaiqi waterproof investment hotliner>
WhatsApp
