Supply Zhongpeng water-based liquid waterproofing membrane

型号：

zpf-829

规格：

20KG/桶

Water-based liquid waterproofing membrane is a new type of composite felt waterproofing material that is formed on-site using high molecular polymer emulsion plus flexible and wear-resistant silicate dry powder materials. It has high weather resistance, UV aging resistance, wear resistance, and tensile strength. High strength characteristics.
Product Features
◎Low carbon and environmentally friendly, fire retardant, non-toxic and pollution-free.
◎Similar to the construction method of waterproof coating, the construction is simple and convenient, and the cost is low.
◎Closely connected to the base surface, the thermal insulation and waterproofing construction is integrated.
◎Can be constructed on wet base surfaces, no need to heat the site for cold construction, and there are no special environmental requirements.
◎It is not only waterproof but also heat-insulating and flame-retardant. It is a new all-weather, multi-functional and integrated waterproof material.
Scope of application
It is widely used in roofs, exterior walls, balconies, indoors, basements, pools, reservoirs and other parts that require waterproofing.
Base surface treatment
◎Remove stains such as floating ash, slag, oil stains, and release agents from the base surface. For low concave areas
:
Cement mortar should be used for leveling. The convex areas should be removed and smoothed. The base surface should be firm, free of looseness and sand, and the surface should be flat and smooth.
◎ Sprinkle water and moisten thoroughly There is no clear water on the base surface.
Construction
◎First, seal and seal special joints such as inner and outer corners, joints, lattice joints, and junctions of different materials, and then use a brush to dip the slurry into the joints and apply it thickly.
◎Apply the stirred slurry to the base surface with a trowel to a thickness of approximately
br/>. Use a brush to fill in the yin and yang angles, corners and junctions of different materials along the direction of the structure.
◎Natural drying and maintenance
Hours.
◎Repeat the second coat of application on the surface of the initially dry and cured waterproof felt. The thickness of the application is about
br/>, and the average total thickness of the two coats of application is not less than
.
◎Natural drying and curing
Wait for an hour until the surface of the waterproof felt is initially dry and solidified.