Aluminum alloy herringbone pole promotion, available from stock!

型号：

15/18米

截面外径：

100/120mm

自重：

120/150kg

Aluminum alloy herringbone pole promotion, available from stock!
Pole erecting machines are divided into pole erecting machines and tripod pole erecting machines. Holding poles are also called character pole erecting machines and aluminum alloy frame pole erecting machines. The tripod pole erecting machine is suitable for erecting poles, lifting lower shaft cables, steel strands and other goods. Its main material is made of high-strength aluminum alloy, which is safe, reliable and light in weight.
>The tripod pole erecting machine adopts high-grade raw materials produced by Tianjin Aluminum Alloy Factory. After years of development and research by our factory's technical staff, it has been officially put on the market. The tripod pole erecting machine is small in size, light in weight, flexible in application and convenient. It is safe and has a high coefficient. It solves the dangerous problems of production areas and artificial pole erection that cannot be carried out by cranes (construction in urban alleys or hilly areas in mid-mountainous areas), which better reflects its characteristics. The entire pole erection process only requires a few people in a short period of more than a dozen people. Completed within minutes. >

The operating procedures of the tripod pole erecting machine: >
.
Set up the tripod pole erecting machine, with the middle vertical point facing the dug pole pit. >
.
Use oil thread to cover the line pole of the tripod pole machine, and put it around the .m mark of the pole of the tripod pole machine. >
.
Manually shake the stabilizer handle of the tripod pole machine, lift the thick end of the pole of the tripod pole machine vertically from the ground, and then place it into the pit. >
.
After being supported, the two auxiliary poles of the tripod pole erecting machine must be parallel to the main pole to form an isosceles triangle. The maximum support point of the two auxiliary poles of the tripod pole erecting machine shall not exceed .>> meters.
>
>
>
>
>Bazhou Yutong Line Machinery Manufacturing Co., Ltd. specializes in the production of tripod pole machines, aluminum alloy pole machines, also known as There are many claims for aluminum alloy pole erecting machines, pole holding machines, and pole erecting machines. They are indispensable pole erecting tools for the construction of electric power, telecommunications, railways, groups, and large factories. The pole erecting machine is mainly suitable for pole erecting and assembling power towers. , lifting cables, steel strands, power wiring and other open places, and the high-strength aluminum alloy pole machine mainly uses high-strength aluminum alloy materials, which is safe and reliable, has strong self-weight, high strength, and is easy to disassemble and assemble.
>Pole erecting machine models: tripod pole erecting machine, herringbone pole erecting machine and aluminum alloy frame pole erecting machine, etc.
>Pole erecting machine specifications:,,
>The following is the technology Parameters:
Tripod pole machine:
>>m
>>m

Total length (>)
.
.
.
Rated load>



Aluminum rod outer diameter>



Structural combination>
.+.+.
.+.+.
.+.+.
Weight>



Herringbone pole:
Overall length
Rated load
Section outer diameter
Structure Combination
Weight

(>)




>>m
.
< br/>
.+.

>>meter
.


.+.

< /b>

Aluminum alloy herringbone pole promotion, available from stock!