Large tie rod transverse corrugation compensator

Pressure level. Connection method:, flange connection, pipe connection
Working temperature ℃ fatigue life times
Lateral compensation amount: according to user requirements
The large tie rod transverse corrugated compensator can compensate for the lateral direction of the bent pipe section Displacement and angular displacement of small magnitude are usually not used to compensate for angular displacement. The compensator consists of a connecting pipe, two bellows, a large tie rod and other parts. It can absorb lateral displacement in any plane of the piping system. The displacement spherical nut rotates around the spherical washer, and the tie rod also has the ability to withstand internal pressure thrust. The compensator consists of two bellows, a long intermediate pipe, a large tie rod and other parts. It can absorb the lateral displacement in any plane of the piping system. The displacement spherical nut rotates around the spherical washer, and the tie rod also has the ability to withstand internal pressure thrust.
B Large tie rod transverse corrugated compensator installation and use precautions:
The small tie rod on the expansion joint is for installation and transportation, and cannot be used as a load-bearing part. After the product is installed on the pipeline, it must Dismantle it before putting it into operation.
.When the lateral displacement of the expansion joint is required to be large or the system pressure is high, the expansion joint can be cold-tightened. The cold-tightening amount is half of the actual lateral displacement, that is, /. The cold tightening direction is opposite to the lateral displacement direction.