16-inch open mill | The best product at the rubber machinery exhibition

Inch open mill|The best product at the rubber machinery exhibition
Inch open mill|The best product at the rubber machinery exhibition
Inch open mill|The best product at the rubber machinery exhibition
Inch open mill| The best product at the Rubber Machinery Exhibition
<3>Operation rules and precautions for open mill equipment Important overview
1. Purpose-inch open mill | The best product at the Rubber Machinery Exhibition
The purpose of standardized equipment operation and equipment maintenance is to ensure the normal operation of the equipment and extend its life, reduce maintenance costs and improve production efficiency, facilitate plate making and color matching, and be used for experimental research and development before being put into production. Inch open mill | The best product at the Rubber Machinery Exhibition
2. Scope of application Inch open mill | The best product at the Rubber Machinery Exhibition
Operation instructions only applicable to the open mill equipment produced by our company
3. Special Responsibilities Inch Open Mill | Best Products at Rubber Machinery Exhibition
Equipment special operators and maintenance personnel designated by the user shall not violate regulations and operate the equipment proficiently, and supervisory personnel shall not approach
and tampering with equipment. Inch open mill | The best product at the Rubber Machinery Exhibition
4. Safety operation details Inch open mill | The best product at the Rubber Machinery Exhibition
, Preparation work before operation Inch open mill | The best at the Rubber Machinery Exhibition Products
⑴ Before opening the mill, you must check whether the circuit (current and voltage, etc.), oil circuit (lubrication of reducer, bearings, etc.), water circuit, etc. are normal! Inch open mill | The best product at the rubber machinery exhibition
Then wear leather wrist guards (gloves are strictly prohibited), wear a mask during mixing operations, and absolutely avoid waist ties, belts, rubber, etc. Clothing operations are strictly prohibited . Check carefully whether there is any debris between the large and small gears and rollers. When driving for the first time in each shift, the emergency braking device must be tested to check whether the braking is sensitive and reliable (if it is a knee-impact device, you must be used to touching your knees to the braking device). It is strictly forbidden to use the emergency braking device to shut down the vehicle during normal operation. If two or more people are operating together, they must respond to each other and confirm that there is no danger before driving.
Inch open mill | The best product at the rubber machinery exhibition
⑵ The temperature rise rate must be controlled when preheating the roller. Especially in the cold winter in the north, the outside of the roller is consistent with the room temperature, and the inside of the roller suddenly When high-temperature steam is introduced, the temperature difference between the inside and outside may be above ℃. The stress on the roller caused by the temperature difference can reach 3.~~., which exceeds that of cast iron. If rubber is added too early, the roller will be easily damaged under the superposition of lateral pressure. For safety reasons, the truck should be preheated when empty and refueled and lubricated when empty. Material should be added when the temperature reaches or is close to the set temperature value. This needs to be emphasized to the operator. Inch open mill | The best product at the rubber machinery exhibition
⑶ The rubber material should also be checked before feeding. If there are hard metal debris mixed with the rubber, it will be put into the rubber mixing machine with the rubber, resulting in a sudden increase in the lateral pressure, which will cause Equipment damage. Inch open mill | The best product at the Rubber Machinery Exhibition
, Key precautions for feeding and mixing operations Inch open mill | The best product at the Rubber Machinery Exhibition