Single blade glue cutting machine | Xincheng XQL-8 glue cutting machine

名称：

单刀切胶机

型号：

XQL-8

厂家：

鑫城一鸣

It uses an old-fashioned double-edged blade to extend the life of the knife. It is made of tungsten steel and can be polished and used repeatedly. The base is filled with lead technology to better protect the blade from damage. The motor uses a Hongqi motor, which has a lifetime warranty. , the equipment itself weighs tons and will not deform the machine body, rubber cutting knife width
, rubber cutting knife stroke
, total pressure
, oil cylinder diameter
, glue cutting stroke time
br/> , rated operating oil pressure.
, pump flow/
pressure
, motor model
power.
speed r/
, overall dimensions ( Length, width and height)
, weight (approximately)
2. General description
This machine is mainly suitable for cutting natural rubber, synthetic rubber and other plastic materials, especially suitable for installation next to the internal mixer. , used for cutting small pieces of rubber material.
This machine is mainly composed of a rubber cutting knife, a frame, a working cylinder, a base, an auxiliary workbench, a hydraulic system, an electrical system and other parts. A lead pad is cast on the base under the rubber cutting knife to protect the glue cutting The edge of the knife.
When cutting raw rubber, manually place the rubber material under the rubber cutting knife, and then press the start button. The rubber cutting knife will be driven by the piston rod and fall along the slide rail on the frame to cut the rubber material. open.
The frame is equipped with two upper and lower limit switches to control the reversing valve to change the movement direction of the rubber cutting knife. At the same time, it can also protect the piston cylinder head.
Phone:
:
Website::rc.c..c