- 名称:
- 18寸开炼机
- 厂家:
- 鑫城
- 型号:
- XK-450
Roller speed ratio::
One-time feeding amount:
Maximum roller distance:
Drive motor power:
Voltage :
Dimensions: about **
Weight:
Pitch adjustment: electric distance adjustment
Reducer Changzhou Guomao box type reducer
Reducer category Hard teeth, double output shaft reducer
Remarks: Bearings are lubricated with thin oil
Material: Alloy chilled cast iron Wuxi Qili roll
Surface hardness: ~
) Bearing: Wafangdian Bearing
Roller lubrication method: Shaft oil lubrication.
The rubber mixing machine is mainly used for the mixing of raw rubber, hot kneading and tableting of the rubber compound.
< Parts and Problems
Causes
Solutions
< The body vibrates seriously and the noise is too loud
/>
> The machine level does not meet the installation requirements
The gap between the bearing seat and the frame chute is too large
The speed ratio gear pair and the driving gear pair are seriously worn
> Adjustment Machine level
Add gasket
Adjust the gear to meet the meshing requirements or replace the gear
< Roller bearing temperature ℃
Improper adjustment of the roller distance
Poor lubrication
Improper assembly
Damage to the bearing bush or journal
Poor cooling of the roller
> Operate according to regulations
Improve lubrication conditions
Reassemble
Repair or replace
Improve cooling conditions
< The reducer is noisy
> Teeth Poor surface contact
Loose fit between gear and shaft (key)
Bearing damage
> Repair the tooth surface to meet meshing requirements
Repair or Replace
Replace the bearing
< Reducer bearing temperature
℃
Poor lubrication
Improper clearance
Bearing damage
Transmission shaft diameter or reducer seat coaxiality is out of tolerance
> Improve lubrication conditions
Adjust clearance
Replace bearing
Repair Or replace
< The roller rotation exceeds the standard after emergency braking
The delay time is too long or the brake contact is poor
Adjustment Or replace
< Safety sheet is frequently damaged
> Safety sheet quality or size does not meet the requirements
Roller distance adjustment
> Replace the safety film
Follow the procedures