Guangxi sales gd-35kv electroscope

Product name: Electroscope Product model:
Electroscope product introduction
To ensure the safety of people and equipment, the electroscope and generator should be stored in a dedicated place with dry air circulation.
. When using an electroscope for electrical testing on electrical equipment, it should be carried out in accordance with the relevant regulations of the electrical industry's safety work regulations.
. Before use, an appropriate type of electroscope should be selected based on the rated voltage of the electrical equipment to be inspected.
.The operator must hold the operating handle and pull out all the operating levers to the correct position before performing electrical testing operations in the order specified.
. When performing electrical testing operations in situations where there is no complete power outage, the electroscope should be tested on the live parts first, then on to the construction site for testing, and then returned to the live parts for retesting to ensure safety. This operation must not be replaced by the self-test button test of the electroscope. The self-test button test is for reference only. The electronic components of the electroscope undergo a natural aging process. In order to ensure the safety and reliability of the power test operation and protect the personal safety of the power grid equipment and power test operators, the normal service life of the electroscope is set at three years from the date of leaving the factory. In special circumstances When it is necessary to extend the service life, it is necessary to obtain the consent of the manufacturer, complete the relevant re-inspection procedures and issue a certificate of agreement to extend the use before it can continue to be used, but the maximum service life shall not exceed five years.
.To ensure the safety of people and equipment, electroscopes must conduct preventive tests regularly according to the deadlines stipulated in the electrical industry safety work regulations.
.Before the preventive test, a visual inspection should be carried out. When it is found that the outer casing of the electrical test indicator is defective or the insulating rod has cracks and other obvious defects, it is not appropriate to conduct a preventive test and should be sent for repair or replacement in time
br/>Type 3 high-voltage AC electroscope is suitable for AC voltages with rated frequency and voltage level of ,,, and for direct contact electroscope. The electroscope is suitable for electrical operation and maintenance personnel in power generation, transmission, substation systems and industrial and mining enterprises. It is an ideal safety tool to verify whether there is voltage. The ambient temperature is a relative humidity of ~, and the use occasion is indoors and outdoors in good weather
Contact number:-Mobile phone
Fax: