Year1
- 包装：
- 桶装
- 规格：
- 25kg/桶
The highest plating speed can reach -
The loading capacity of the plating solution is large, and it can accommodate up to square decimeters per liter of plating solution. Long-term operation and stable performance
Strong deep plating ability , Strong throwing ability
High hardness and strong corrosion resistance
Low porosity and no pores in the coating
Good wear resistance, better than electroplating chromium
Good weldability, able to Wetted by solder
Good electromagnetic shielding performance, can be used for electronic components and computer hard drives
Properties of electroless nickel plating
Phosphorus content: -Resistivity:
Density: ./3 Melting point: -℃
Hardness: plated state: -() Bonding strength: much higher than after electroplating heat treatment:
Internal stress: the internal stress on steel is lower than
Instructions for use
The product adopts the internationally accepted three solutions of B and B. Open the cylinder with B and analyze the consumed components of the replenishing working fluid according to the nickel ion concentration. It is extremely convenient to add the working fluid with B.
Cylinder opening method
Take the preparation of one liter of working fluid as an example
B
The remaining amount is deionized water (conductivity lower than /) and 3. (adjustment value.)
Temperature: - ℃ loading capacity:
The specific method is to first calculate the volume and mark the scale on the wall in the tank, fill half of the volume with deionized water, then add and B, and add deionized water to a point below the scale line. Then use 3. Adjust the value to the scale line, heat it to ℃, and then plating according to the process requirements.
WhatsApp
