Manufacturer supplies water-soluble anti-rust sealant | water-soluble anti-salt spray sealer

Water-soluble anti-salt spray anti-rust sealer
Simple-price anti-rust sealer is a brown liquid that is not easy to burn, environmentally friendly and non-toxic, and can form a dense protection on the surface of metal (the workpiece will be better after electroplating) The film has strong anti-rust, anti-corrosion and anti-discoloration effects. It is easy to use, easy to operate, and requires simple equipment. It is suitable for metal stamping iron parts, various standard parts, etc. after plating (such as nickel, chemical nickel, blackening , black nickel, tin, zinc, chromium, etc.,) anti-rust and anti-corrosion treatment, widely used in electroplating, continuous electroplating, chemical plating. The anti-rust ability and salt spray resistance of the treated workpiece can be greatly enhanced, the surface gloss is good, it will not stick together, and it will not affect conductivity and welding.
Operation process: Two washes of electroplated workpiece, two passes of passivation, and passivation, closed drying (dry directly without washing until the white liquid just disappears. If the drying time is too long, it will affect the appearance and salt spray resistance. ) Packaging
Operating process
Concentration % (i.e. 1 liter of working fluid contains 1 liter of sealing agent. 1 liter of pure water, standard value %)
Please use normal temperature water to dilute the working fluid temperature, if it does not dissolve Please dilute with warm water.
Time seconds and minutes (if time permits, it is recommended that the soaking time be more than minutes)
Drying temperature
℃ (The workpiece after soaking can be dried directly without washing with water. If the appearance is affected, it can be washed with water for a while and then Drying)
Concentration usage parameters
Degree
Surface condition of the workpiece after treatment
Salt spray (neutral) resistance
% (recommended to dilute with pure water)
Dry
No rust for 1 hour
% (recommended to dilute with pure water)
Almost no oily feel
No rust for 1 hour
% (recommended to use pure water) diluted)
Slightly oily feeling
. No rust for hours
Before use, please shake the original solution evenly and pour it out of the cylinder. The temperature of diluted water is degrees. Working fluids that have not been used for a long time must be stirred evenly before operation. The above data are for reference only (there will be differences due to different coatings, plating types, and workpiece materials). Working fluid maintenance is calculated and added based on the amount taken out. It is recommended to replace the working fluid after one week of use. If there are spots on the surface of the workpiece after treatment, lower the workpiece and drying temperature to ℃, and re-operate the workpiece with spots. There is no need to re-plating. If you have any problems during the operation, please call us
< br/> Note
This product is sometimes light yellow and sometimes dark red. Sometimes it dissolves faster and sometimes slower. This is normal. Please feel free to use it.
.This product has two models, one of which is the special anti-salt spray type and the bright anti-rust type. If the anti-rust and anti-salt spray ability is poor, please extend the soaking time or increase the concentration. If the oily feeling is too heavy, please reduce the concentration. .
.If you put the rack directly into this product for treatment, please clean it before putting it into the plating tank to avoid bringing the medicine into the plating solution and affecting the plating solution
.If the test results are not up to your company's Please tell us the reason so that we can provide a more suitable model.
Packing liter/barrel
Please store in a cool and ventilated place, away from high temperature open flames and flammable items.
Statement that the content and suggestions of this manual are based on the company's experimental data. Since each user has differences in operation and equipment, the company does not make any representations about the results of using the company's related products. We guarantee and are not responsible for damages caused by adverse results. All information in this manual shall not be used as evidence of copyright infringement.