Factory direct supply 75507 non-corrosive oil removal powder | aluminum and copper workpiece oil removal powder

(
Corrosion-free aluminum and copper oil removal powder
)
.
It is used as a pre-treatment for the finishing process of aluminum and copper workpieces, and can quickly remove dirt on their surfaces.
.
Wide process range and no corrosion on the surface of the workpiece.
.
It can simplify operating procedures, reduce production costs, improve economic efficiency, and has a long service life.
Process parameters

Range
Optimum value
Tank concentration
/
/
Working temperature
< br/>
Time


Ultrasonic frequency
Aluminum
Copper
Stirring

Mechanical or air stirring< br/> Tank heater material

Stainless steel
Tank preparation procedure
.
Add half of the clean water into the working tank and heat to.
.
Slowly add the required amount of
while stirring.
.
After complete dissolution, add water to the working liquid level and heat to working temperature.
Management methods
.
The workpiece can be swung during use, and the treatment effect is better
.
The overflow tank method can be used to treat floating grease, and the sediment at the bottom should be pumped out in time to remove Increase the service life of grease liquid
.
The degreasing effect and speed of the solution can be maintained through chemical analysis or by supplementing this product based on experience. When there is too much oil in the end, the solution needs to be replaced
Storage
This product easily absorbs moisture and needs to be stored in a cool and ventilated place, moisture-proof and sun-proof.
Wastewater treatment
The solution is alkaline and can be neutralized with acid to ~. After precipitation treatment, the solution can be discharged directly. It will not cause pollution to the environment. Please ask the local environmental department for details.
Precautions
It is alkaline and will not cause harm to the human body. But avoid touching eye skin.
Contact information Taiyang Electroplating Anticorrosion Raw Materials Co., Ltd.
Address Yanbu Town, Nanhai District, Foshan City