Manufacturer supplies electroplating anti-blue spot sealant | 919 anti-blue spot sealant

Anti-blue-spot sealing agent
Introduction: The electroplated product has large pores, which brings great difficulties to the product's rust prevention and blue-spot testing. Therefore, our company developed an anti-blue-spot sealing agent. , to solve this shortcoming.
Operation process
Electroplating workpiece passivation, water washing, anti-blue spot sealing treatment, water washing, direct drying, cooling and packaging
Concentration % (generally used. Please dilute with pure water, use a plastic box or stainless steel solvent The container is loaded with working fluid, which can be heated with a stainless steel heating rod.)
Soaking time: minutes
The working fluid temperature is normal temperature ℃ (normal temperature is also acceptable, heating is recommended)
The drying temperature should not exceed ℃, and the time should not exceed ℃. Fixed, as long as the white working fluid disappears. In order to achieve the best effect, the drying time should be controlled until the white water droplets disappear and the surface of the workpiece has a slight oily feel. If the temperature is too high and the time is too long, the anti-rust ability will be greatly reduced.
The above data are for reference only
Storage in a cool, dry place
Packaging kg/barrel
Statement that the contents and suggestions of this manual are based on the company's experimental data Since each user has differences in operation and equipment, our company does not guarantee the results after using our related products, nor is it responsible for damages caused by adverse results. All information in this manual shall not be used as a Evidence of copyright infringement.
Contact information
Telephone
Mobile phone (Xu Sheng)
Address Area code of Xinhua Street Shop, Yanbu, Nanhai District, Foshan City, Guangdong