Year1
- 规格：
- 25KG/桶
Product Name Copper Chemical Polishing Agent
Product Model
Daily Production Capacity Tons
Minimum Order Quantity
The main function is used to replace the traditional chromic acid polishing process to make copper reach Mirror-like brightness.
We can provide customers with free sample designs!
Detailed description
Product introduction
This product is a high-gloss, environmentally friendly product developed by our company based on the latest hydrogen peroxide environmentally friendly utilization technology. Suitable for chemical polishing of all pure copper and brass alloys. The products processed by this process can achieve a polishing effect several times higher than that of traditional pickling. The process is easy to control and master, and there is no strong acid, acid fog, yellow smoke, safety and environmental protection. Moreover, the oxygen generated during the polishing process will increase the oxygen ion concentration in the workplace and improve the working environment.
Characteristics and advantages
Temperature-resistant and non-decomposing. Added high-efficiency hydrogen peroxide stabilizer and does not decompose quickly below the temperature
High brightness. This product has high gloss and strength, which is better than the general process
Simple one-step brass polishing process. There is no need to remove the film to complete
Guarantee
Process flow
Oxygen-free copper workpiece basketing/hanging to remove oil, degreasing, bleaching water, chemical polishing, bleaching water, washing and stripping (
Solution soaking~, Until the surface reveals a bright color) Rinse with bleach, passivate the copper material, rinse with bleach and wash with pure water
Dry finished product packaging
Instructions for use
If you are using this product for the first time, please read the material safety data sheet carefully. No experience. Users should use it under the guidance of professionals, and small-batch trial production will be successful before mass production. This product is a raw solution for use at room temperature.
The workpiece can only be soaked at room temperature. The time is about seconds to minutes (the specific time can be appropriately extended according to the required surface level to achieve a smooth and bright effect.
When multiple workpieces are soaked in at the same time, the workpieces must not overlap, and the workpieces need to be constantly shaken to make them separate. The surface is evenly contacted with the liquid to ensure the polishing effect.
After the workpiece is taken out, it must be flushed immediately, otherwise it will affect the consistency of the polishing effect.
After repeated polishing, the liquid will gradually turn green , is a chemical reaction and is a normal phenomenon.
WhatsApp
