Year1
- 外廓尺寸：
- 495×320×400 mm。
※Product introduction:
Internal combustion rail drilling machine (hollow drill bit), a special tool for rails. This machine has a wide range of applications. It can be used on lines, in construction, and in large and medium-sized line maintenance operations. It is light in weight, small in size, and is a portable machine. The clamping is firm during operation,
2. Detailed parameters of internal combustion rail drilling machine (hollow drill bit)
Gasoline engine:., two-stroke engine. Drilling diameter:
Rated speed:
Drilling accuracy: hole position tolerance
Drilling time: time to drill through once
Overall machine quality:
Overall dimensions: .
3. Operating Procedures for Internal Combustion Rail Drilling Machine (Hollow Drill Bit)
Operators must be trained and certified to work. Wear protective glasses, gloves and minimum protective equipment when working.
Before operation, check whether the machine is operating normally, whether the drill bit is clamped, and clean the remaining chips in the drill bit. Is the cooling system normal?
Remember not to touch the exhaust pipe and cylinder body of the machine to avoid burns.
When refueling the machine, you must stop the machine and wait until it cools down. Keep away from fire sources and smoking is strictly prohibited.
. Two-stroke engines must use a mixture of oil and engine oil adjusted in proportion. It is absolutely prohibited to use pure oil as fuel
. Internal combustion engines must run at low speed for 3 to 3 minutes without load after starting and before stopping. It is strictly prohibited to run without load. High-speed operation with large throttle and sudden stop during high-speed operation.
4. Operation of the cooling device
The cutting fluid used in the drill bit is machine tool emulsified soap.
The upper part of the cutting fluid barrel is equipped with a sealing and pressurizing device, which is pressurized with a pressurizing handle.
Before use, pull the pressure reducing valve to check its reliable function and ensure safe use.
When using, open and close the stop valve, and use the stop valve to adjust the liquid supply.
, the mixing ratio with engine oil should be: according to the volume ratio. Use a special pot to mix. Shake evenly during the mixing process. It is strictly forbidden to mix at will without following the requirements. It is best to do it outdoors in a ventilated place.
Clean the fuel tank frequently. Clean the filter in the fuel tank cap and the surrounding dust before refueling to prevent dust from clogging the fuel pipe.
5. Internal combustion engine operating procedures
Open the oil valve. During a cold start, move the damper to the closed position, and during a hot start, move the damper to the open position.
Confirm that the drilling machine has been clamped on the rail, pull the starting handle, control the length of the rope when pulling it, and slowly retract it back to the machine guard to ensure that the starting rope is re-tightened.
3. After starting, turn the choke away from the off position, close the throttle to the minimum, and let the machine run at idle speed. The drill pipe will not rotate. If the drill pipe rotates, it means that the idle speed is too high and should be adjusted.
6. Use of rail-type positioning plates
Install appropriate positioning plates according to the rail type drilled in the rail. The corresponding position of the positioning plate is marked with specification fonts. As long as the corresponding fonts are facing up and close to the side of the rail, it is correct.
, center pin positioning, turn the dual-purpose positioning plate to a certain position, and then tighten the upper and lower screws to use.
7. Maintenance
Please refer to the machine instruction manual for machine maintenance.
8. Product features of internal combustion rail drilling machine (hollow drill bit):
, a special tool for drilling railway rails. This machine has a wide range of applications. It can be used on lines, in construction, and in large and medium-sized line maintenance operations. It is light in weight, small in size, and is a portable machine. During operation, the clamping is firm, the installation is accurate, and the disassembly is quick, which can effectively ensure driving safety.
, high-speed alloy steel hollow drill bit, short drilling time, high precision and long service life.
This machine adopts an internal cooling structure in the spindle and is equipped with a high-pressure cooling pot.
, suitable for drilling operations of 3~/ various types of rails.
.This machine can be operated by one person. Please read the machine manual before operating.
※Company introduction:
Jining Hengwang Industrial and Mining Machinery Co., Ltd. is located in the charming city of Jining, the hometown of Confucius and Mencius and the capital of canals. It borders the Oriental Holy City Qufu to the east, the historic Beijing-Hangzhou Grand Canal to the west, and the historic Beijing-Hangzhou Grand Canal to the south. It is adjacent to Qilu Lingxiu Weishan Lake and to the north is Mount Tai, the most famous of the five mountains. The company was established in 2001 with a registered capital of RMB 10,000 and currently has more than 100 employees. It specializes in operating rock drills, rock drills, shotcrete machines, support equipment, scraper accessories, rail equipment and other mining equipment and accessories according to market needs. The company adheres to the business philosophy of providing convenient services to customers, creating development opportunities for employees, and the entrepreneurial spirit of being enterprising and enjoying success. We warmly welcome new and old friends from all walks of life at home and abroad to negotiate trade, create great causes and create brilliance together.
※Contact information:
Mobile:
Telephone:
Fax:
Manager: Zhang Shuang WeChat:
:
Email: @
Website::3
※After-sales service and delivery instructions
, Cost-effectiveness instructions:
Under the same product quality conditions, our company will not provide any information at the expense of reducing performance or changing product parts. The lowest and most realistic price. (Product production configuration can be carried out according to customer requirements)
Delivery instructions:
Delivery is based on the supply period. If there are special circumstances that require early delivery, our company will do so within a limited scope. We will organize personnel to increase productivity, implement production, installation, debugging, packaging and other processes, and strive to meet your company's requirements
Product delivery comes with instructions:
①Product manual and maintenance manual
②Product Certificate of conformity
③Instructions attached to purchased parts
④Wearing parts and their list (the source may vary depending on the model)
. After-sales service scope:
The product warranty period is one year. If the product has quality problems during the warranty period, our company will provide the fastest maintenance without any cost. If parts need to be replaced outside the warranty period, our company will only charge the cost
Track the product:
Our company will After the product is sold, there will be at least one technical return visit every month to track and record the use of the product so that any problems can be dealt with in a timely manner and strive to achieve customer satisfaction.
WhatsApp
