A professional production team creates a two-way YTF400 rail seam adjuster for you

professional production team creates a two-way rail gap adjuster for you. China's railways have a history of more than a hundred years. Over the past hundred years, the means of railway track maintenance have evolved with the rapid development of my country's railways. , is also changing with each passing day, from the initial purely manual maintenance to small machinery to large machinery. It can also be said that the history of China's railway road maintenance methods is a microcosm of the history of my country's railway development. Jining Hengwang Industrial and Mining Machinery Co., Ltd. is also constantly updating its products and improving its services under the trend of railway science and technology development. If you have any questions, you can call: at any time, Xiao Zhang will answer you!
※Product introduction:
1. - Type II rail gap adjuster
Performance description
The rail joints of railway lines must have a certain gap, which is called rail gap. The size of the rail gap has a direct impact on the operating safety of the train and the condition of the railway line. If the rail gap is too large, the train will cause low joints on the line. Under the influence of the impact changes of the wheels, the wear of the joints in the rail will be accelerated. In severe cases, the rail head may fall off or the train may derail. Without rail seams, under the influence of temperature and temperature changes, internal stress will be generated longitudinally inside the rail. When this stress exceeds a certain level, the rail row will move laterally, causing a track phenomenon, which will destroy the normal state of the line. Therefore, the size of the rail gap is crucial to the safety of train operation and the service life and condition of the railway line. When the rail gap changes beyond the normal range, the rail gap must be adjusted in time. There are many types of rail gap adjusters. The following introduces a hydraulic rail gap adjuster that is suitable for line rail gap adjustment operations of various types of rails. This machine has the function of pushing large rail seams, is easy to operate, has high work efficiency, has anti-jamming function, and is safe to use. .
Check whether the oil level in the tank reaches /3 of the tank height before use.
Use engine oil in summer and engine oil in winter. Filter when refueling.
Whether the control part is flexible and reliable, whether the oil return valve opens and closes normally, and whether all hydraulic parts work normally.
Whether the fastening parts of each connection are loose and whether there is oil leakage.
2. Type II rail gap adjuster
Parameters


Maximum thrust:
Working stroke:
Working oil pressure:
/>Maximum operating force:
Exterior dimensions:
Quality:
Performance characteristics:
3. Type II rail gap adjuster
Operating steps
Move the operating lever on the clamp body downward to make the clamp body fall on the rail.
, tighten the oil return valve clockwise, and use the joystick to shake the oil pump rocker
to input the hydraulic oil into the working cylinder 3. When the piston is extended, the inclined iron can clamp the rail and continue to rock the control The rod can achieve the purpose of adjusting the rail seam.
④After each rail gap adjustment, you should first unscrew the oil return valve in the counterclockwise direction, and then move the lever upward to loosen the inclined iron, so that the piston of the working cylinder will be reset under the action of the tension spring, which completes a working cycle.
This machine is equipped with two oil return valves. When one of them fails, open the other oil return valve to reset the oil cylinder, which improves the safety performance of the machine.
After completing the operation, move the levers on each clamp body upward to use the pawl to drop the running wheel on the rail surface and push it to the next rail seam or the lower track of the complete machine.
There is a relief valve in the oil tank, and its pressure has been adjusted before leaving the factory. When the load is too large, the relief valve unloads to ensure the safety of the machine.
※
Company introduction:
Jining Hengwang Industrial and Mining Machinery Co., Ltd. is located in the charming city of Jining, the hometown of Confucius and Mencius and the capital of canals. It borders the Oriental Holy City Qufu to the east and the historic Beijing and Hangzhou to the west. The Grand Canal borders Qilu Lingxiu Weishan Lake to the south and Mount Tai, the most famous of the five mountains, to the north. The company was established in 2001 with a registered capital of RMB 10,000 and currently has more than 100 employees. It specializes in operating rock drills, rock drills, shotcrete machines, support equipment, scraper accessories, rail equipment and other mining equipment and accessories according to market needs. The company adheres to the business philosophy of providing convenient services to customers, creating development opportunities for employees, and the entrepreneurial spirit of being enterprising and enjoying success. We warmly welcome new and old friends from all walks of life at home and abroad to negotiate trade, create great causes and create brilliance together.
※
Contact information:
Mobile:
Telephone:
Fax:
Manager: Zhang Shuang WeChat:
: Email: @
Website::3
※
After-sales service and delivery instructions
, Cost-effectiveness instructions:
Under the same product quality conditions, our company will not reduce performance or change product parts. Price, give the lowest and most realistic price. (Product production configuration can be carried out according to customer requirements)
Delivery instructions:
Delivery is based on the supply period. If there are special circumstances that require early delivery, our company will do so within a limited scope. We will organize personnel to increase productivity, implement production, installation, debugging, packaging and other processes, and strive to meet your company's requirements
Product delivery comes with instructions:
①Product manual and maintenance manual
②Product Certificate of conformity
③Instructions attached to purchased parts
④Wearing parts and their list (the source may vary depending on the model)
. After-sales service scope:
The product warranty period is one year. If the product has quality problems during the warranty period, our company will provide the fastest maintenance without any cost. If parts need to be replaced outside the warranty period, our company will only charge the cost
Track the product:
Our company will After the product is sold, there will be at least one technical return visit every month to track and record the use of the product so that any problems can be dealt with in a timely manner and strive to achieve customer satisfaction.