Industrial ring network switch|Network optical transceiver|POE optical fiber switch|HD video optical transceiver

1.
Product
Overview
It is a fiber optic aggregation switch developed by our company based on independent software. It has 100M optical ports, 1 Gigabit optical ports and 1 adaptive Ethernet electrical port. The optical port can only be in full-duplex or full-duplex mode, while the R electrical port can work in,,,, full-duplex or half-duplex mode. It is a true/adaptive optical fiber switch. The optical module has single-mode/multi-mode, single-fiber/ Double fiber requires two core optical fibers to transmit one Ethernet signal, while single fiber only needs one core optical fiber to transmit one Ethernet signal. Transmission distance: multi-mode: single-mode: (optional).
The optical fiber aggregation switch is composed of an R electrical port twisted pair interface and an optical interface, which are used to connect twisted pairs and optical fibers respectively. Its characteristic is that the electrical port can be adaptive to straight-through/cross-over lines, and can be in full-duplex or half-duplex mode. The interface can be inserted into optical modules and electrical modules according to user needs. It has good stability and reliability.
The optical fiber aggregation switch is an optical and electrical signal switch used to centrally exchange multiple electrical signals and optical signals of the 100M Ethernet network ( ). It complies with the .3/ standard. ＞Hours
2.
Product Features
(
100M optical port
+
Gigabit optical port
+
Gigabit electrical port
)
. Composed of 1 electrical port, 1 optical port and 1 optical port
. Standard: conforms to
. Or b, full duplex/ Half-duplex auto-negotiation, smooth upgrade
. Management and settings, division, traffic rate limit, etc. through B interface
. R-based division can be performed, this division method does not affect the remote device
/> . Built-in efficient switching core to reduce broadcast storms, flow control, error checking
. . Division, at this time, the local and remote interfaces can be divided into the same
. Ring network type has self-healing function , enhancing the system survivability
. The transmission distance without relay can reach ∽km
. The optical port supports uplink and downlink, and multiple devices can form a cascaded Ethernet network
. Optical module, single-mode/multi-mode, single-fiber/dual-fiber (optional)
. Power supply:
3. Support desktop and wall-mounted
. Comprehensive indicator light status display
. Fully transparent transmission can be set up, and the data packet length is not limited
. Supports multiple network protocols and wiring standards
. High system reliability and stability
. The original components are selected from the world's largest telecommunications companies Mainstream devices from product manufacturers
. Mainly adopts B network management method, with simple and intuitive operation interface and comprehensive functions.
Product Compatibility Agreement



.
.
.
Industry Standard
.
:
(), 3(R),
, (r),
(), (common mode conduction)
Industry:
Railway:
Transportation
Coal: B/
Mechanical:
Ethernet electrical port
＞Electrical port: Number of interfaces: Interface type:,
＞Rate: adaptive, full/half Duplex fully adaptive
＞Protocol: supports .3,
＞Address table: can learn addresses
＞Physical interface: Block R, supports (crossover/straight line adaptive)
/> Optical interface
＞Optical interface: Number of interfaces: Interface type:,
Number of interfaces: Interface type:,
＞Wavelength: single mode
Multimode/3 (optional )
＞Number of optical fiber cores: single fiber/dual fiber (optional)
＞Transmission power: B∽
＞Transmission length: single mode
Multimode (optional)< br/> ＞Receiving sensitivity: better than
＞Connector:, Default:
Mechanical characteristics
＞Shell: Protection level, metal casing
＞Installation method: desktop, wall-mounted Formula
Working environment
＞Operating temperature: ~℃
＞Storage temperature: -~℃
＞Relative humidity: ~ (no condensation)
Power supply
＞Power supply: /, 3 (external)
(built-in)