8-optical and 8-electrical optical fiber aggregation Ethernet switch, capable of forming rings and links

1. Product description
Optoelectronics is a fiber optic aggregation switch developed by our company based on independent software. It has 100M optical ports and 100M electrical and Gigabit b adaptive Ethernet ports. Network power port. The optical port is in full-duplex mode and the R electrical port can work in full-duplex or half-duplex mode. It is a true adaptive fiber switch. The optical modules include single-mode/multi-mode, single-fiber/double-fiber, and dual-fiber is required. Only two-core optical fiber can transmit one Ethernet signal, while a single-fiber only needs one core optical fiber to transmit one Ethernet signal. Transmission distance: multi-mode: single-mode: (optional).
The optoelectronic fiber optic aggregation switch is composed of an R electrical port twisted pair interface and an optical interface, which are used to connect twisted pairs and optical fibers respectively. Its characteristic is that the electrical port can be adaptive to straight-through/cross-over lines, and can be in full-duplex or half-duplex mode. The interface can be inserted into optical modules and electrical modules according to user needs. It has good stability and reliability.
Optoelectronic fiber optic aggregation switch is an optoelectronic signal switch used to centrally exchange multiple electrical signals and optical signals of 100M Ethernet ( ). It complies with the .3/ standard. ＞Hours
2. Functional Characteristics
◆ Composed of one optical port, one electrical port and Gigabit b
◆ Standard: compliant
◆ The Ethernet electrical port supports full-duplex and half-duplex Duplex network communication with auto-negotiation capability
◆ Ethernet port support (crossover line and direct line adaptive)
◆bHigh backplane bandwidth, layer 2 switching packet forwarding rate reaches line speed
br/> ◆ It can detect when the optical signal is lost, indicating that the peer device is powered off or the optical fiber is unavailable, and indicates an alarm through the indicator light
◆ The electrical port of the optical switch is an adaptive port, and will be adjusted according to the electrical port of the connected counterpart device. Listen to the highest rate to set your own rate
◆ No-relay transmission distance up to ∽km
◆ Single fiber/dual fiber, single mode/multimode
◆ Interface: / (default)
/> ◆ Power supply: external power supply/,, built-in power supply
3. Technical parameters
Ethernet electrical port
Electrical port: Number of interfaces: Interface type: /,
Rate: /Adaptive, full/half-duplex fully adaptive
Protocol: supports .3,
Address table: can learn an address
Physical interface: R block, supports (crossover/straight line auto- Adaptation)

Optical interface
Optical port: Number of interfaces: Interface type:,
Wavelength: single mode
Multimode/3 (optional)
Number of fiber cores: single fiber/double fiber (optional)
Transmitting power: B∽
Transmission length: single mode/
Multimode (optional)
Receiving sensitivity: excellent to
Connector:, Default:
Backplane bandwidth

Packet forwarding rate

Mechanical characteristics
Shell: Protection level, metal shell
Installation method: desktop, wall-mounted

Industry standard
.
:
(), 3 (R),
, ( r),
(), (common mode conduction)
Industry:
Railway:
Transportation
Coal: B/
Machinery:

Working environment
Working temperature: ~℃
Storage temperature: -~℃
Relative humidity: ~ (no condensation)

Power supply
Power supply: /, (external)
(built-in)