Year1
- 1：
- 1
- 1：
- 1
- 1：
- 1
The 2nd Vietnam International Industrial Exhibition
-
International Plastics and Rubber Industry (Vietnam) Exhibition
-
Location:
Jiang Vo International, Hanoi, Vietnam Convention and Exhibition Center (to be determined) Date:
Year Month Day to Date
Organizer:
Vietnam Ministry of Industry, Vietnam Ministry of Science and Technology, Vietnam National Department of Planning and Investment
Vietnam Ministry of Environment and Resources The Ministry of Construction of Vietnam, the Ministry of Trade of Vietnam, the Ministry of Transport of Vietnam
Hanoi Municipal People’s Government of Vietnam
Chinese designated exhibition recruiting unit:
Guangxi Nanning Huabo Exhibition Service Co., Ltd.
Market introduction:
Vietnam has a population of about 10,000 and its economy has developed rapidly in recent years. Currently, Vietnam has an industrial zone and a coastal economic zone. The total import and export volume of each industrial zone and economic zone exceeds 100 million US dollars every year, accounting for 3% of Vietnam's total annual import and export volume. The foreign investment attracted by various industrial zones and economic zones accounts for the country's total foreign investment. Vietnam's industrial output has become the fastest growing field in Vietnam's GDP, after the service industry. Vietnam's industry has grown rapidly in recent years, but its industry has just started and its industrial base is relatively backward. The Vietnamese government is aware of the importance of industrialization and modernization. Vietnam's industry is now committed to balanced structural adjustment and striving to increase added value. To this end, in the next few years, Vietnam will need a lot of investment to introduce advanced technology and equipment and improve the level of domestic manufacturing.
On March 1, the China-ASEAN Free Trade Area was established, and commodity trade between China and ASEAN countries achieved zero tariffs. ASEAN's rapid economic growth, a population of 100 million, and huge market demand for trade volume of trillions and trillions of dollars have made it the most dynamic and potential trade market in the world today. Vietnam is a member of the ASEAN Free Trade Area. In recent years, Vietnam's economy has achieved sustained and significant development.
Vietnam relies heavily on imported raw materials and equipment to support and develop the plastics industry. Vietnam's plastics industry currently faces the challenge of a lack of raw materials and relies on imported raw materials to operate. The raw materials produced by itself can only meet the raw material demand for domestic production. According to statistics, the industry’s annual import volume is ~ 10,000 metric tons, with an import value of approximately 100 million U.S. dollars, and annual exports of 100,000,000 U.S. dollars of plastic products. Vietnam’s plastic industry should invest in the construction of plastic waste recycling plants. Currently, there are approximately , plastic manufacturers in the country, mainly Distributed in Hanoi and Ho Chi Minh City. With state investment and the introduction of advanced equipment, the total output of plastic products in Vietnam has reached more than 10,000 tons. However, so far, Vietnam’s plastics industry is competitive and can only defeat foreign rivals in household plastic products. Plastic daily necessities in Vietnamese supermarkets are In domestic production in Vietnam (this proportion accounts for 3% of the total output of the plastic industry), the raw materials required for food packaging, various beverage packaging, clean mineral water packaging, water and seafood packaging, etc. can almost be produced in Vietnam. At present, many Vietnamese plastic companies have begun to enter the export market and invest in the introduction of high-tech equipment. For example, Longcheng Company invested in the production technology of four-color printed beer boxes and Datong Jin Company invested in high-tech equipment companies such as film lamination and blown composite film technology. Vietnam's plastics industry can still only provide general household plastic products, and it will still need to continue to invest in the future. According to the Vietnam Plastics Corporation, future investment in Vietnam's plastics industry will require about 100 million U.S. dollars. Recently, Vietnam's plastics industry has submitted a report to the Vietnamese government for the period from now to this year. Investment projects, three of which are raw material production projects, Vietnam's plastic machinery business opportunities are very considerable. In recent years, the number of Taiwanese businessmen investing in Vietnam has increased. TECO Group, Yelian Steel, and Compal Group have also begun to invest. It is expected that electronic component manufacturers will come one after another, adding business opportunities to plastic-related production equipment such as injection machinery. In recent years, Vietnam's economy has developed rapidly and people's consumption levels have also increased. The demand for plastic products, both general plastic consumer goods and industrial building materials, has gradually increased, such as: plastic ceilings, plastic floors, plastic panels, plastic partitions, plastic doors, plastic The market share of plastic building materials such as window frames, high-end electricity, automobile cooling systems, motorcycles, and electronic and telecommunications plastic parts has also gradually increased.
Exhibition introduction:
Vietnam International Industrial Exhibition and International Plastics and Rubber Industry (Vietnam) Exhibition
It is one of the well-known and important brand exhibitions in Vietnam and even Southeast Asia, with a history of 20 years. With its good reputation and extensive publicity, the annual exhibition has attracted the attention of the same industry at home and abroad. It has now become the largest international and professional industrial manufacturing technology and equipment exhibition in Vietnam. Every year the exhibition attracts Vietnamese and foreign exhibitors. The exhibition area is nearly 10,000 square meters, the outdoor area is square meters, and the number of visitors reaches 10,000 people/time, and the professional visitor rate is as high as 10,000. Exhibitors came from Vietnam, Russia, China, India, South Korea, Japan, Singapore, Thailand, Malaysia, Taiwan and other countries and regions, and nearly 100 foreign companies participated in the exhibition.
Scope of exhibits involved:
. Plastic and rubber raw materials and additives.
Plastic and rubber injection molding production technology and equipment. Series of plastic injection molding machines, two-color injection molding machines, disc injection molding machines and rubber injection molding machines, etc. Plastic and rubber extrusion production technology and equipment.
3. Production of plastic foam sheets, pipes (hard pipes, hoses, corrugated pipes, composite pipes) special profiles, sheets, composite films, round wires, flat wires, wires, cables, mixing and granulation, etc. Technology and equipment. Plastic blow molding production technology and equipment. Production technology and equipment for plastic extrusion blow molding, injection blow molding, injection stretch blow molding and hollow molding.
Plastic packaging, printing production technology and equipment. Production technology and equipment for woven bags, cement bags, saliva lamination, vacuum blister molding, composite flexible packaging, printing and cutting bag making, hot stamping, etc.
Others: Related production technologies and equipment for polyurethane, polystyrene foaming, plastic welding, flat vulcanization, plastic door and window assembly, plastic flooring, artificial leather and other production technologies and equipment.
.
Related supporting accessories and various accessories and molds. Internal mixing equipment: mixer, feeder, dryer, crusher, chiller, vibrator, cutter, reducer, electric motor, electrical components, pneumatic and hydraulic components, heater screw barrel, mold, etc.
. Rubber and plastic products. Various tires, tapes, rubber hoses (including resin hoses), rubber shoes, sealing products and various plastic products, etc.
Purpose of the exhibition:
, to display the image and product advantages of Chinese enterprises to Vietnam and even ASEAN countries, and to increase visibility
, to make the corporate image known among end customers, industry insiders and the general audience through the exhibition, Accept, improve and strengthen
Introduce the performance, characteristics, quality, price, operating procedures and usage of the products to be promoted to customers and audiences
Collect market information, investigate market dynamics, characteristics, needs, trends, Potential and development prospects
, get to know partners, including: direct end customers, potential buyers and agents
, introduce products, technologies, and cooperative projects to Vietnamese companies, and promote a deeper understanding between Chinese and Vietnamese companies, Expand exchanges, strengthen cooperation, and promote overseas investment by Chinese companies exporting products, etc.
Schedule:
(Note: The specific itinerary and activity arrangements will be notified the day before departure, please pay special attention
)
Check-in at the designated hotel in Nanning, Guangxi on March 2: From Nanning via Youyiguan commercial vehicle leaves the country to set up exhibitions in Hanoi, Vietnam
Month-day: opening ceremony and exhibition month-day: exhibition or business activities
Month-day: Exhibition in the morning, dismantling in the afternoon Month-day: Departure in the morning and return from Vietnam Nanning, free to disperse.
Exhibition format:
,
Exhibit and rent a booth independently. The image of the company, enterprise and product is intuitive, negotiation is convenient, and the effect of the exhibition is obvious
,
Visit the exhibition with the group to inspect the market, distribute information in the exhibition hall, and participate in all business activities of the exhibition for free.
Exit procedures: All personnel will leave the country with private passports
3 days before departure, please provide the original valid passport and two two-inch color photos and mail them to the exhibition organizer for unified visa processing.
Exhibition fee:
Booth fee
Includes: exhibition bench surface, 3/power sockets, one negotiation table, two chairs, English fascia board, light pipe support, carpet, etc. Personnel fee:
Including food, accommodation, travel, business, group translation, insurance, Vietnam passport and visa expenses arranged after arriving in Nanning and before returning to Nanning from Hanoi before the meeting.
Registration procedures:
Please fill in the exhibition agreement form carefully and fax this form to the organizing committee to confirm the reserved booth.
After receiving the exhibition agreement form, we will determine the booth according to the order of registration. The booth reservation will not take effect until the exhibitor pays the booth fee in advance. The remaining fee must be paid 3 days in advance before the exhibition. The organizing committee will Notify other relevant matters.
After confirming the booth, please send the exhibitor's company profile and list of exhibiting products to the organizing committee by email. The requirements are one copy in Chinese and one in English.
For consultation and registration, please contact:
ASEAN-Vietnam professional exhibition service agency-Guangxi Nanning Huabo Exhibition Service Co., Ltd.
Address: Rongbaohua Mall Building, No. 3 Xingguang Avenue, Nanning City, Guangxi Postcode: @ 3
Contact person: Mr. Deng Fangli Tel: ., 3Fax:
WhatsApp
