Year1
- 功率：
- 1000W
- 光源种类：
- 金卤灯/钠灯
- 防护等级：
- IP65
Power:
Model:
Brand: Ronlang
Manufacturer: Wenzhou Ronlang Electric Co., Ltd.
-Scope of application< br/> It is suitable for large-scale lighting in various large-scale operations, construction sites, building facades and other places. It can also meet the lighting needs of engineering machinery, facilities and urban landscapes.
-Performance characteristics
. Using high-efficiency gas discharge as the light source, the bulb has a service life of more than 1 hour, and is especially suitable for unattended lighting of large areas outdoors.
.Using lightweight alloy materials and high-tech spraying technology, the shell will never rust or corrode. The interior of the lamp body is double shock-absorbed by structure and material, and the entire lamp has good earthquake resistance.
3. Adopt new processes such as piping to ensure that the shell has good integrity, reliable sealing, and is waterproof and dustproof.
.It has good electromagnetic compatibility and will not cause electromagnetic interference to the surrounding environment.
.The overall temperature rise of the lamp is low and the heat dissipation is good, which can reduce the probability of failure.
.The humanized appearance design and environmentally friendly color matching are fully harmonious and integrated with the natural landscape.
- How to use energy-saving floodlights
According to the site environment and lighting needs, after determining the appropriate installation location and method, prepare a three-core cable according to the length from the ballast to the power contact .
, unscrew the fixing screw of the back cover of the ballast, open the back cover, then loosen the compression nut of the ballast cable introduction port, and introduce one end of the cable through the compression nut to the input wiring of the control circuit board At the socket, connect and fix the cable, ground wire and ground wire to the corresponding terminal socket, then tighten the cable compression nut and tighten the back cover of the ballast with screws.
In the selected installation position, use expansion bolts to install and fix the lamp and ballast. The ballast can be installed next to the lamp or within 3 meters of the lamp after changing the length of the connecting cable between the lamp and the ballast.
When replacing the bulb of this lamp, first loosen the three butterfly nuts in the middle of the lamp holder, then pull the tail of the lamp holder upward to open the lamp holder, unscrew the bad bulb and replace it with a new one, and finally follow the reverse sequence. Lamp head restored.
-Warning:
Be sure to cut off the power supply before disassembling, repairing or replacing lamps.
- Precautions
Keep the lamp and ballast housing clean so that the lamp has good heat dissipation performance.
Non-professionals are not allowed to disassemble lamps and ballasts at will.
Lamps must be reliably grounded.
When working, the power supply voltage needs to be kept within a certain range to ensure the service life of the ballast.
Technical parameters
Power:
Rated voltage:
Light source type:/Gas discharge lamp
Shell protection:
Anti-corrosion level:
Overall dimensions :
Total weight:
Quality assurance
This product is quality controlled in strict accordance with: international quality management system standards to ensure that product quality is higher than national standards and fully meets design requirements. The product is subject to annual warranty , The light source has a one-year warranty. Within one year from the date of purchase, if any failure occurs under normal use of the product, the company will be responsible for free maintenance.
-Energy-saving floodlights
33 -Energy-saving floodlights/>
WhatsApp
