High-quality internal combustion imported profile rail grinding machine keeps its promise

::. < /> < . High-quality internal combustion imported profile rail grinding machine
-Jinzhou Shuangxing has twenty years of professional manufacturing
Contact person: Manager Zhang
Address: Linghe, Jinzhou City, Liaoning Province District Songpo Road
Office:
Fax:
Customer consultation:
- Striving to create the industry's leading brand Jinzhou Shuangxing
High-quality internal combustion imported profile rail grinding machine
/> Power type: Gasoline engine
Maximum speed of grinding head:
Grinding wheel specification:
Grinding wheel stroke:
Grinding wheel inclination angle:-
Feed amount per revolution of handwheel:< br/> Overall dimensions:
Overall machine quality:
High-quality internal combustion imported profile rail grinding machine
Working principle: .type internal combustion rail grinding machine, powered by a gasoline engine and driven by a centrifugal clutch The synchronous pulley transmits power to the main shaft through the synchronous belt, driving the grinding wheel to rotate. At the same time, a feed handwheel is used to adjust the feed amount of the grinding wheel. If you need to polish the rail side and arc, you can rotate the profiling hand. The wheels perform track grinding on the rails.
The basic structure is shown in the figure:
Copying handwheel, copying frame, 3-feed handwheel, gasoline engine, frame, bolt-fastened grinding wheel, guide wheel, traveling wheel
Excellent product Internal combustion imported profile rail grinder
, Before use, the engine oil must be filled according to the gasoline engine instructions
, Grinding wheels with a speed lower than r/ are not allowed
, The machine must be stopped before replacing the grinding wheel
/> . Never use a damaged grinding wheel
. After replacing the grinding wheel, run it idling for 3 seconds. During the test run, other personnel must stay away from the site
. Check whether the grinding wheel is intact before use and check whether the fastening nut is loose.
The angular contact bearings of the grinder spindle, the rolling bearings of the guide wheels, the running wheel bearings, the intermediate wheel synchronous pulley bearings, the clutch bearings and other bearings must be regularly injected and replaced with grease.
After the machine has been running for a cumulative number of hours, the main shaft bearing should be disassembled and cleaned, and the grease should be replaced.
, Do not throw or drop during use and transportation.
If not used for a long time, the machine should be placed in a ventilated, dry and corrosive-gas-free warehouse, and the internal combustion engine should be drained of fuel.
The grinding wheel should be moisture-proof, anti-collision and anti-pressure.
The recommended operating ambient temperature for gasoline engines is between -℃ and ℃.
It is recommended to use unleaded gasoline with an octane number or higher. When filling gasoline, the engine should be stopped and kept away from fire sources. Refueling should be done in an appropriate amount. After refueling, the remaining gasoline on the surface of the machine should be wiped clean.
Frequently check whether the lubricating oil of the gasoline engine is sufficient and whether the air filter is clean.
. Do not let the machine be exposed to rain. If it is exposed to rain, dry the gasoline engine and all parts of the machine.