Sitong 3-ton truck-mounted crane Tang Jun chassis blue brand small crane is now available

3-ton truck-mounted crane._Copy
Main technical parameters of the truck-mounted lifting and transport truck: Model:
Chassis selected: Tang Jun Ouling (blue plate can be hung)
Emission standard: National IV< br/> Maximum lifting capacity:
Boom: meters*3 knots
Maximum lifting height: meters
Engine model: B (Sida machine)
Engine power:
/> Tire model:
Wheelbase:
Overall dimensions: .*.*
Interior dimensions of cargo compartment: .*.*
Total mass:
Curb weight:
Rated load capacity:
The crane manufacturer introduces the safe operation rules of the crane:
The crane driver must have car driving skills and receive professional technical training. Only after he is proficient can he get on the car and operate independently.
. Drivers should be familiar with the mechanical principles, maintenance rules, and safe operating procedures of the crane, and must strictly implement them in accordance with the regulations. It is strictly prohibited to operate after drinking alcohol or when the body is not suitable.
Before use, you should check in detail whether the working site is flat and solid, whether the outriggers are firm, and whether the operating handle, brake and other operating devices are sensitive and reliable. Work can only be started after confirming that there are no abnormalities.
When lifting the hook, the workpiece must be lifted in the direction of the rear of the vehicle. A test lift must be performed first before lifting. Avoid lifting too high and minimize the time the object stays in the air. The speed of the lifted object must be maintained when lifting. Slowly and evenly.
During operation, the wear of the wire rope should be observed frequently. When the lifting angle of the lifting arm is large, the hanging object should be lowered to the parking position first, and the lifting arm should be lowered while keeping the sling tensioned. , loosen the rope, and remove the hook.
When lifting and lowering the boom, you must do this: When lifting heavy objects, the arm must not be dropped. The throttle should be small when the arm is lowered and the throttle should be large when the arm is raised. The rotation should be smooth and no sudden reversal is allowed. When the load is close to the rated weight, it should not be rotated in the air above the ground.
. It is strictly prohibited to drive with a heavy load. When driving, the lifting arm must be placed on the bracket, the hook must be hooked on the bumper, and the wire rope must be tightened.
After the work is completed, leg lifting and arm rotation must not be performed at the same time. When driving on the highway, you must strictly abide by traffic rules, turn slowly, strictly control the speed when going downhill, and do not coast in neutral. Always keep in mind the precautions when driving the crane.