Shandong Crane 4-ton small crane equipped with hydraulic system small crane

3/3/ Ton crane
Main technical parameters of ton crane: Model turbine reducer
Maximum lifting weight Jianghuai Bridge
Boom: .m* knot diesel engine pump
Maximum lifting Height: meters motor pump
Engine model: Changjia machine single-stage gearbox
Engine power: horsepower
Tire model:
Outrigger span: .*3. (horizontal* Vertical)
Dimensions: .*.*
Motor power:
Driving speed:
Jining Sitong small crane manufacturer introduces the precautions for the use of small cranes during the running-in period. :
. During the running-in period, the workload should not be too large, but a reasonable workload should be arranged to prevent the machine from causing various problems caused by long-term operation. When an abnormality occurs, stop the vehicle in time, check the problem, and continue operation after the problem is resolved.
. During the running-in period of a small crane, the working load should generally not exceed the rated working load and should be operated appropriately to prevent overheating caused by continuous operation of the machine. During operation, you should always observe whether the instructions on the instrument on the small crane are normal. It is best to add some grease to the lubrication points every day. When operating a small crane, always observe the indications of each instrument. The director appears. It is necessary to stop the operation in time and eliminate the reasons.
3. Frequently check the lubricating oil, coolant, brake fluid, and fuel (water) level and quality of the small crane. And pay attention to check the overall tightness. Regular maintenance is required to keep the surface of the small crane clean, and timely inspection and adjustment of loose parts are required to prevent loosening from exacerbating wear and tear of parts. When you see loose screws or loose areas, repair them promptly. Don’t wait for problems to arise. Pay attention to the hygiene and cleanliness of the small crane during use.
. At the end of the running-in period of the small crane, inspection work must be done, and oil replacement must also be paid attention to. If the operator has the ability to drive the small crane, it is best to have knowledge of the small crane. To understand in advance, you should pay attention to all aspects of the performance of the small crane. After you have enough understanding of the small crane, after receiving professional training from the manufacturer, and after reading the manufacturer's instructions for use, you can better operate the small crane.