Guizhou Qiandongnan hand-push cement concrete vacuum water suction machine equipped with high-efficiency water-absorbent pad

Purpose of the vacuum water suction machine: It lays a suction pad on the surface of the concrete after pouring, vibrating, and drying, starts the vacuum pump, and sucks out water from the concrete to reduce the water-cement ratio of the concrete, thereby speeding up the construction progress and increasing the density of the concrete. degree and improve the strength of concrete.
The vacuum concrete water absorbing machine is used in conjunction with the vacuum absorbing pad. The size of the vacuum pad can be customized according to different construction sites.
Dingcheng brand vacuum water suction machine
B-type vacuum water suction machine is mainly composed of eight main parts. Water tank. Vacuum gauge. Vacuum pump. Motor. Tire. Frame. Cover. Electrical appliances
Technology Parameters
Parameters: Vacuum degree, intake and exhaust pipe diameter
Inlet and outlet pipe diameter, power distribution model
Working voltage 3 working current
Speed r/power
Overall dimensions and weight
/> Operation method
Before using the vacuum water suction machine, the water tank should be opened, filled with clean water, and then fastened with the lid to ensure tightness and no air leakage. It is strictly forbidden to start the machine without adding water.
When connecting to an external power supply, the pump shaft should be turned in the direction of the arrow and should not be reversed.
During the construction period, the return pipe must be checked regularly to ensure smooth flow and blockage is strictly prohibited.
When the water output is very small or there is no water, it must not be operated for a long time to avoid the temperature of the pump body rising and affecting the service life. The water temperature in the pump must not exceed (- degrees).
During vacuum processing, the general vacuum degree should be within the range of (~).
Working Principle
This pump uses the basic principle of the water ring multi-vacuum pump to carry out technical transformation. Through the high-speed rotation of the impeller, a vacuum is generated in the pump chamber, and the moisture in the concrete is sucked into the water tank by the external atmospheric pressure. After settling, part of the water is sucked back into the pump chamber from the return pipe, so that it can work continuously and discharge the water from the water tank
Jining Dingcheng Industrial and Mining Equipment Co., Ltd.
Contact: Zhang Wenfeng
Mobile phone
WeChat:
Landline
Fax:
: