Prestressed metal spiral pipe rolling machine, high quality corrugated pipe pipe machine, bridge corrugated pipe production equipment

Prestressed metal spiral pipe machine
1. Scope of application:
This type of pipe making machine is a device for producing prestressed concrete reserved channel metal corrugated pipes. It uses galvanized or cold-rolled steel strips (black strips ) is rolled into a double corrugated shape and is undercut and crimped to form a corrugated pipe. This machine has small size, high efficiency, simple operation and maintenance, and is suitable for centralized use on construction sites or factories.
2. Performance and features:
This machine is easy to learn and understand. (Our factory has professional technician training, and generally young workers can learn it in two to three days)
It saves materials and has a high pipe output rate. Compared with other domestic models, the steel strips of the same specifications can produce more pipes. The multi
pitch is.~
The speed is fast and the stepless speed regulating motor is used. (Skilled workers Фm/hour Фm/day), saving electricity. (Ф:./100 meters)
, durable, quality guaranteed. (No major repair is required within 200,000 meters of production)
3. Main technical parameters:
Main motor model power:
Cutting machine power:. Water pump power: Water tank capacity: liters
, The quality complies with: /- (Metal Spiral Pipe for Prestressed Concrete) "Industrial Industry Standards of the People's Republic of China"
, Radial stiffness. b. Tensile load resistance, and concentrated load resistance deformation are not greater than.
Steel strip specifications: .3～.3. Bellows pitch: .~
, pipe production speed:
Ф3～Ф～/Ф～Ф～
Ф～Ф～ /Ф～Ф～
Ф～Ф～/Ф～Ф
, pipe inner diameter
Ф3～Ф3 (standard type) Ф～Ф3 (special type) (advance reservation and deposit required )
, total mass:
, size: (length, width and height)
4. Work flow and working principle:
Raw material (steel strip) rrr cleaning tank rrr belt guide rrr Forming roller rrr winding die rrr undercut crimping rrr into tube rrr cutting.
Working principle: Put the .3~.3 steel strip into the water tank containing emulsified oil and pass it through the belt guide frame. Control the deflection of the steel strip and enter the four sets of forming rollers. The steel strip is pressed into a double wave and semicircle (reinforcing ribs). The shape with the left side folded upward and the right side folded downward is then wrapped around the die head, squeezed by the flanging wheel and pressed by the edge pressing wheel, so that the upward and downward folding edges are tightly buckled and indented by the straight-tooth embossing wheel. After being engaged, they are compacted by the compression wheel to form a tightly interlocking corrugated pipe. Continuously roll and extend to the required length. When the end of the pipe contacts the travel switch, the main motor will automatically stop and then be cut with a cutting machine to complete the production of a pipe. Then start the main motor to make the next bellows.
Jining Dingcheng Industrial and Mining Equipment Co., Ltd.
Contact person: Zhang Wenfeng
Mobile phone
WeChat:
Landline
Fax:
: